in

How to Enter UEFI on Windows 10 Computer

The BIOS is important minor software that lays on one chip of the motherboard and is accountable for the basic operations like configuring hardware and booting. The UEFI is the new software created to replace legacy BIOS including extra benefits including advanced security, quick boot times, huge capacity hard drive support and much more. If you run Windows 10 device then mostly firmware works automatically. Sometimes you need to go into motherboard BIOS to troubleshoot issues, adjust memory and processor advanced settings, disable and enable features. The only caution is that BIOS is the startup environment.

This means that you cannot access it when Windows 10 is running. Though if users need to modify the system settings, here are various steps to access motherboard firmware. If you need to enter UEFI on the Windows 10 Computer, then this post might be useful for you. Keep on reading to follow the instructions and to execute it.

How to Access UEFI via Settings

If you wish to access UEFI via Settings, then pursue the given instructions:

  1. Launch Settings.
  2. Tap on Update and Security.
  3. Select the Recovery option.
  4. Press on Restart now options below the Advanced startup menu.
  5. Choose the Troubleshoot option.
  6. Press the Advanced options.
  7. Hit the UEFI Firmware settings button.
  8. Tap on Restart.

As the procedure completes, the device will start again and boot in the UEFI firmware that lets you modify. The advanced settings like to enable or disable secure boot, modify boot order, customize the hardware RAID array, allow virtualization and several other settings according to the motherboard support.

How to Access UEFI via Boot Key Option

If you do not have access to Windows 10 system or users are using a device with legacy BIOS, you can access firmware while booting.

If you want to access UEFI via boot key option, then you can follow the provided steps:

  1. Click on the Power option.
  2. View display splash to discover a key that you may click to enter firmware.
  3. Tap on the key continuously till you go to the setup mode. Normally you have to click the ESC, Delete or any Function keys.

 As you finish the instruction, device is going to access BIOS or UEFI firmware according to the motherboard support. If you are unable to view details on display or device boots too quickly, start the system again and as the boot begins, you have to click required key several times fast. If you cannot make the PC to access firmware via keyboard, you may have to check the device manufacturer to locate a key that you may have to press while booting.

Here are few PC brands and the keys to access motherboard firmware:

  • Acer: F2 or Delete.
  • MSI: Delete.
  • Samsung: F2.
  • Dell: F2 or F12.
  • Lenovo: F1 or F2.
  • HP: ESC or F10.
  • Surface: Click then hold volume up option.
  • Toshiba: F2.
  • ASUS: F2 or Delete.

If you have UEFI firmware on your device, you cannot appear to access it during the startup, so it recommends applying the Settings button in Windows 10.

Source url:- https://williamsblogpoint.wordpress.com/2020/02/27/how-to-enter-uefi-on-windows-10-computer/

Report

What do you think?

Written by ellygarcia

Ava Williams  is a Microsoft Office expert and has been working in the technical industry since 2002. As a technical expert, She has written technical blogs, manuals, white papers, and reviews for many websites 

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Loading…

0

Which is the Best Acting and Photography School in Mumbai?

How to pay an electricity bill from home?