Now that you have prepared the building area for your floating deck in New Zealand, it is time to frame it. You should cut the framing pieces and construct the deck frame. You will then move on to installing your deck once the frame is complete.
Tools and materials
You will need a circular saw, drill driver and bits, jigsaw, miter saw, and a handheld planer for the tools. For the materials, you will need concrete deck blocks, paver base, concrete cap blocks, and pressure-treated lumber.
Precautions
When building a deck in New Zealand, it is important to take the necessary precautions. You need to wear eye protection, dust mask, hearing protection and other necessary protective gear depending on the environment you are working in.
Measuring and cutting the lumber
You should start by cutting the frame elements to the correct size and laying out the floor joists.
Assemble the frame
Floating deck installers in New Zealand should start fitting and assembling the frame elements. Ensure the two side joists are in place on the perimeter deck blocks. Put the centre beam in the right place on the blocks. It should run between the side joists.
Install the floor joists
You can begin installing the floor joist with the frame squared.
Framing around a tree
If you are building your deck around a tree, you have to plan out your framing so that the joists would go around the tree.
Installing the end joists
Install the end joists that will run parallel to the floor joists. This will connect the two rim joists.
Final framing steps
When framing a floating deck NZ, you should get all the steps accurately to avoid complications. With the frame in place and the step frames well attached, there are a few things you should do before installing the deck.