Disclaimer: This is a user generated content submitted by a member of the WriteUpCafe Community. The views and writings here reflect that of the author and not of WriteUpCafe. If you have any complaints regarding this post kindly report it to us.
in

Fixes For The Error HP Printer Installation Failed Windows 7

Many users encounter a number of problems during the installation of their HP printer. And HP printer setup neglected Windows 7 is just one of the annoying situations that can also be faced. If you are already in this situation and this challenge prevents you from performing common functions as you see fit, then this report will be the best choice for you to solve. You just have to stick to the upcoming methods carefully. So let's start with the procedure.

Great Ways to Fix HP Windows 7 Printer Setup Problem:

In this part of the guide, we will explain some simple and quick techniques that will allow you to eliminate the problem without problems:

Strategy 1: Troubleshoot the USB connection

To fix the problem, you first need to troubleshoot the USB connection. Here are a few steps to take a look at the USB cable and link.

Step 1: Make sure the USB cable is HP compatible

For this, you need to check whether the USB cable is compatible with HP or not. It is important to know that HP supports USB cables less than 3 meters (9 feet 10 inches) in length. In this case, replace the USB cable with a supported cable if the length of the USB cable exceeds 3 meters (9 feet 10 inches).

Step 2: Make sure the USB cable is properly connected to the printer

In fact, it is important that the USB cable is connected to the object in the right way.

Make sure that the icon on the USB cable is usually facing up each time you plug in the cable.

On the back of the component, insert the smaller end of the USB cable fully into the USB port.

If there is a problem with the link, you can disconnect the USB cable and then reconnect it. Make sure Plug and Play setup starts automatically.

There is no need to continue troubleshooting if such measures have resolved the situation. If the above steps did not resolve the issue and if the issue persists, continue to the next step.

Step 3: Make sure the USB cable is properly connected to your personal computer

At this stage, make sure that the long, flat end of the USB cable that connects to the computer's USB port in only one direction is properly connected to the personal computer's device.

To make sure that the long, flat end of the USB cable is aligned with a USB port on your computer that is fully labeled with the USB icon.

If you run into any problem, you need to unplug the USB cable and then plug it in properly. As in the previous step, you need to be sure that the Plug and Play setup will start automatically.

After following the steps above, judge if they have resolved the matter or not. If the problem persists, go to the next step and try to fix the problem.

Step 4: Check the USB port

If there is absolutely no problem with that USB, the problem could be with the USB port, the USB hub, or even the notebook docking station. To troubleshoot these things you want to do in the upcoming steps:

You need to check the USB port on the computer when the USB cable connects directly to the computer.

If the USB is not, you need to use option 2 and assess whether the USB cable connects to a USB hub or notebook docking station.

To fix the problem, you must connect the cable to another available USB port on the computer. Suppose if you connect a USB cable to the front interface of your computer, you want to disconnect the cable and then plug it into the air vent on the back of your computer.

If you are still aware that the problem is occurring on your personal computer, please do the following.

Strategy 2: Eliminate the problematic driver

To help the operating system communicate with the device you want to install the drivers in the hardware part. In most cases, due to compatibility issues or a problem while installing or installing a wrong and outdated driver, there may be an HP printer setup error failed with Windows 7. You need to remove the driver to fix the problem as a failed driver setup can cause printer problems, and it may stop configuring the appropriate drivers. To achieve this, follow the steps and resolve the failed HP printer setup issue in moments.

Step 1: To start the procedure, after turning off the printer, disconnect the printer cable from the back of the PC device.

Step 2: Then you need to visit the Control Panel. 

To achieve this, open the menu and then hit “ Control Panel. Then there will be an option “ View devices and printers ” under the section “ Hardware and Sound ”, click on it. Next, you have to select the ‘Devices and Printers' option which you will discover in the traditional Control Panel.

Step 3:  Here you need to uncover and find a problematic printer setup that you can spot in the “Printers and Faxes” section. Click “Remove Device” after right-clicking the printer. After performing the steps associated with the unsuccessful driver installation, Windows will get rid of the device.

Step 4: It is important to uninstall any additional software connected to the printer to fix the problem permanently. For this, you need to go back to the Control Panel and then click on “ Uninstall the application ”, you will see in the “ Programs ” section. In case you are using the traditional perspective, you need to click on the “Applications and Attributes” icon. And then, to finish uninstalling additional drivers or applications, you need to scroll through the list of installed applications. Then finish uninstalling any additional drivers or applications associated with the failed printer setup. To achieve this, right-click on the application you wish to uninstall and then select “Uninstall / Change”.

Step 5: When finished, restart your computer and make sure you reinstall the printer on your version of Windows with all the latest drivers.

Also Read:- 0xc00000e9 windows 7

Hope the above methods will allow you to eliminate the problem easily and you will be able to solve the HP printer setup error of failed windows. If you would like to give us your feedback on this guide, feel free to comment on this report without hesitation.

Report

What do you think?

Written by Adam Mathews

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Loading…

0

Top 5 Soundbars You Can Get This Year

Computer repair technician skills