Disclaimer: This is a user generated content submitted by a member of the WriteUpCafe Community. The views and writings here reflect that of the author and not of WriteUpCafe. If you have any complaints regarding this post kindly report it to us.

The hole so just a heads up on that so we're going to try and copy that bend right there so what works really well for this is a big-ass crescent wrench because it's spread wide so we're just going to put it on there make sure you get even with it and just pull gently i'm just going to use a hammer okay so now we have two two bent ones now we've got the original and the new one so it should work out pretty good on going wow wow you guys exactly the same i made these in 2017 and without these it took me a long time so these templates helped me a lot that's what we're looking for and so now we'll continue on cleaning these all up finding some hardware for them and then deciding on whether i'm going to polish them or paint them black probably just gonna paint them black.

Air Filter at Clear Air Box Issues

So basically i'm just using a fine fine disc on this now bring it all up get rid of all the burrs and stuff and make it a little more professional looking there it is all put together and then cleaned up with the with the blue scotch-brite disc and uh basically now i can leave it like foam air filter oil or paint it and probably paint it give them a paint job some cheap five dollar paint home depot  here all right well uh i've been drying for a bit but we're gonna speed them up a little bit this cheap paint all right so here's the pieces all painted up this is a new one this is the new one i just did so it turned out pretty good.

leaning B Air Filters The EASY Way

I like that so next up i've got a little bit of 3m tape left two different sizes here so my plan was is to create a gasket i didn't do this on the last time but just to create a gasket so what i'm going to do is i'm going to take a hole punch i'm just going to center a hole in this and so now this is gonna act as our gasket i'm just gonna wind what's the other one here probably all probably all the tape i'm gonna have to yeah and also i went got some hardware so we have stainless quarter inch stainless bolts uh one's half inch long and the other is three quarter and so the three quarter they're meant to go through the base plate so they'll be in there just like that and then they're gonna bolt.

AIR & FUEL FILTER UPGRADE

To the car so i'm using the half inch long ones for the mount or for the riser and i've got some stainless steel nuts served and some nylocks but i'm just going to use regular ones here for now all right well here they are all painted up and we have double-sided tape uh it's more of a gasket well foam air filter oil a gasket and a cushion rather than it being to hold it there the bolt does just fine and so we have two of these guys ready to go stainless hardware these are the old ones and these are the new ones the paint didn't hold up so well but these are the new ones stainless hardware and so that's what you'll see be nice and it'll be pretty clean

Login

Welcome to WriteUpCafe Community

Join our community to engage with fellow bloggers and increase the visibility of your blog.
Join WriteUpCafe