How to Fix Proxy Issues on Windows 10?

Source: How to Fix Proxy Issues on Windows 10?

There are lots of operating systems, and all have some beneficial service and also some critical issues. All the operating systems contain some issues even in a renowned one like Windows 10. There are some Windows 10 that mostly occurring proxy issues. According to several users, they complained that sometimes Windows not detect network proxy settings error message.

So, if you are facing similar issues in your device, then you can go through with this article where we will teach how you can fix this issue in simple ways.

Check the Settings of Proxy Server

In case you intend to check the settings of the proxy server, then you can opt to follow the below-mentioned guidelines.

Go to the Internet Explorer and turn off the proxy server.
After that, hold the Win + R keys at the same on your system to launch the Run section.
You should input ‘inetcpl.cpl’ into it and hit the Enter key.
Go to the Connections section, and select the option of LAN settings.
Now, look whether the proxy settings.

Restore TCP/IP

If the users are trying to restore TCP/IP, then they should carefully apply the given steps.

Hold the Win + X keys at the same time on your system.
After that, click on the Command Prompt within the menu.
You should input ‘netshintip reset resetlog.txt’ into it and hit the Enter key.
Now, reboot the system and check whether the problem is fixed.

Using System Restore

In case you intend to use the system restore, then you can opt to follow the below-mentioned guidelines.

Hold the Win + S keys at the same time to open the Windows Search.
After that, input ‘system restore’ into it and hit the Enter key.
You should click on the ‘Create a restore point’ within the result’s list.
Then you will see a ‘System Properties’ screen on your system.
Thereafter, select the System Restore option.
Once the ‘System Restore’ screen shows, select the Next button.
You can see the current restore points list.
In case applicable, tick the option of ‘Show additional restore points.’
You should choose the preferred restore point and select the Next option.
Finally, pursue the on-screen steps to finish the process of restoration.

Execute a System File Checker Scan

If the users are trying to execute a System File Checker scan, then they should carefully apply the given steps.

You have to launch the ‘cmd’ as an administrator.
After that, input ‘sfc /scannow’ into it and hit the Enter key.
Finally, the System File Checker scan will begin, and it will take some time to finish the process.

Restore the Internet Settings

In case you intend to restore the internet settings, then you can opt to follow the below-mentioned guidelines.

Hold the Win + S keys at the same time on your system to launch the Windows Search.
After that, input ‘internet options’ into it and hit the Enter key.
Then reach the menu and select the Internet Options.
Go to the Advanced section and select the Reset button.
You have to choose the Reset option. In case you would like to remove the personal data by marking ‘Delete Personal Settings.’
Alternate, select the Restore advanced settings option.
Later, select the Apply button and then OK.
Now, once you reset the Internet settings, the error should be fixed.

Reboot Network Adapter

If the users are trying to reboot the network adapter, then they should carefully apply the given steps.

Go to the Network button and right-click on it in the lower right-hand side of the screen.
After that, click on the ‘Open Network and Sharing Center option.’
You should reach the menu on the left-hand side of the screen and select the ‘Change adapter settings.’
Then find the network connection and right-click on it.
You have to choose the Disable option.
Finally, select the network connection and right-click on it once more, then click on the Enable option within the menu.

Turn on Obtain DNS Server Address Itself

In case you intend to turn on obtain DNS server address itself, then you can opt to follow the below-mentioned guidelines.

You should launch the ‘Network and Sharing Center’ option and click on the ‘Change adapter settings’ option.
Thereafter, find the network connection. After finding it selectand right-click on it.
Go to the menu and click on the Properties option.
You should click on the ‘Internet Protocol Version 4 (TCP/IPv4)’ and select the Properties option.
Now, click on the ‘Obtain DNS server address automatically’ option and select the OK button to apply the changes.

Modify Proxy Settings

If the users are trying to modify proxy settings, then they should carefully apply the given steps.

Hold the Win + I keys at the same time to launch the Settings application on your system.
After that, once Settings App appears on your screen, click on the ‘Network & Internet’ tab.
Go to the left-hand side panel and select the Proxy and reach the right-hand side panel turn off the ‘Automatically detect settings.’

Launch Network Troubleshooter

In case you intend to launch the network troubleshooter, then you can opt to follow the below-mentioned guidelines.

Go to the Settings application and launch it on your system.
After that, click on the Update and Security tab.
Reach the left-hand side panel and select the Troubleshoot option.
Then click on the Network Adapter in the right-hand side panel then choose Run the troubleshooter.
When you see the Troubleshoot screen, pursue the on-screen steps to finish it.

LAURA BARTON is a creative person who has been writing blogs and articles about security. He writes about the latest updates regarding office.com/setup and how it can improve the work experience of users. His articles have been published in many popular e-magazines, blogs and websites.