If you are thinking How to Fix Canon Hard Disk Error Code E602 & tired of searching Google & Dozens of forums then now, you are at the right place. If you are a tech savvy then it will be an easy task for you, but if you are just a geek then this might sound trouble to you. May be the hard disk is not fit properly in the Removable hard Kit section of the printer. The main cause of this error code is because of faulty wiring (short circuit, open circuit), faulty Hard Disk, the main controller PCB fault, and many others.
Follow the Steps below to Fix Canon Printer Hard Disk Error Code E602 –
SOLUTION 1 – Verify Hard Disk Cable
You should check the connection of the Hard Disk cable, maybe the wiring connection & the cable between the connector is not connected properly.
SOLUTION 2 – Check the Main Controller PCB
Turn OFF the main power of the Printing machine and then verify that the main power indicator on the printer control panel is not lit properly. If the issue is not resolved, then you should try to replace the main controller PCB.
SOLUTION 3 – Verify HDD
You should properly check the Removable HDD Kit of your Printer. May be a problem is occurring there.
SOLUTION 4 – Reinstalling the System Software
You should try to download & reinstall the system software. After this maybe, your problem with Canon Printer is resolved.
Hope, you are successfully able to Fix Canon Printer Hard Disk Error Code E602. But if you are not able to fix it by following the mentioned procedures then Visit Us for more: CLICKHERE!
