Disclaimer: This is a user generated content submitted by a member of the WriteUpCafe Community. The views and writings here reflect that of the author and not of WriteUpCafe. If you have any complaints regarding this post kindly report it to us.

High-quality prints from HP printers are well-known. Free shipping and returns are only two of the many appealing features they provide their customers. You may have an HP printer in your home or office. However, what happens if your printer fails to function properly, or hp 6520 not printing black?


What Should You Do If Your HP 6520 Printer Isn't Printing Black?


The Blocked Cartridge Must Be Removed


The following are possible solutions to the hp 6520 not printing black issue. Please proceed through the following issues one by one.


Have trouble printing black on your HP 6520? Check for a blockage in the printer's air intake vent. Because of this, your printhead cannot print anything, not even black. To correct this, perform these steps:


  1. Activate your HP printer.
  2. On your HP printer, remove the cartridge panel.
  3. Permit the printhead to reset itself.
  4. Remove the printhead as well as the color units from the printer.
  5. It is now required to clean the print head.
  6. It should be properly cleaned with water and then blotted dry with a flat towel.
  7. After you've cleaned and dried your HP printer, you'll need to reinstall the driver.
  8. Reintroduce all of the accessories to their proper positions.
  9. Conduct a test print to check the quality of your printing. Both black and CYMK color modes of printing are available.


Utilize The Printer's Utility


  1. Examine the Ink in the Cartridge
  2. Maintain the Switch On the mode of your printer.
  3. Open the cartridge panel on the printer's hood.
  4. New, high-quality cartridges should be used to replace any used or expired ones.
  5. Make the most of the printer's screen.
  6. On the screen, check for the () signal (Left corner) (Left corner)
  7. Use the directional arrows on the screen to navigate to the Tool menu.
  8. Select Ok from the Tool drop-down menu. Ok will appear.
  9. You can now monitor the ink levels in your cartridges. Then click OK to confirm your selection.


Take advantage of the cleaning device that regulates itself


For now, go back to the Printer Window.

Return to the Tool selection by selecting the () sign and using the directional arrows.

After picking the Tool choice, press Ok once again.

Locate the Print head cleaning option using the right arrow.

The print head will take some time to self-clean.

{:gap {:kind :userinput}} will generate a test print for you once the cleaning process has been completed.


Once the two treatments have been successfully performed, you should be good to go. The problem with your HP Photosmart 6520 not printing black will almost probably be fixed. However, if you still have a detective test print. To evaluate it, follow the steps below:


Return to the tool selection screen to check the quality of the test print.

Use the directional arrows to navigate to the print quality report.

The whole quality report will be delivered to your email address.


By conducting the above-mentioned test, you can identify if your ink cartridge has a problem. Proceed to the upcoming stage.


Removal of faulty ink cartridges and alignment


Defective ink cartridges may also result in printing issues, such as a blank page or the inability of your HP printer to create black color. Follow these simple techniques to resolve the HP 6520 Not Printing Black issue:


Power Utilization of an HP printer

Open the printer panel and allow the cartridge to move to the center.

Press the ink units out of the print head slots to remove them.

It is vital to verify the expiration date. Replace them if they have reached their expiration date.

Now is the moment to deactivate the printer's control panel.

For printer alignment demonstrations, paper loading, and color unit calibration, see the Printer Screen.

Click Ok to end the presentation of information.

The printer will commence the alignment process automatically.

After removing the scanner from the stack, place a test print on it.

The printer's screen will display the information. Simply press the OK button when you're finished.

Your printer is now positioned ideally.


Here are five suggestions to keep in mind to ensure that you never have to deal with the hp 6520 not printing blackk issue again.


Always Bear In Mind The Following:


HP cartridges were installed as instructed by the manufacturer.

During the process of physically cleaning an HP printer's print head. Keep the printer in the off position.

Never install a fresh cartridge without first removing the shielding strip.

Nozzles on ink cartridges should never be damaged in any way.

Before inserting the ink cartridges, confirm that they fit properly.

The print quality of HP printers is well-known. They give all of their user's intriguing offers and services, such as free shipping and returns, that they find tempting. There's a good chance you have an HP printer at home or in the office. The question is, what happens if your printer breaks, or why is my hp 6520 not printing black?




Welcome to WriteUpCafe Community

Join our community to engage with fellow bloggers and increase the visibility of your blog.
Join WriteUpCafe