Brick wall construction doesn't have to be intimidating. Although constructing a brick wall may seem straightforward, it requires a lot of expertise and correct technique. Each stage, from creating a solid foundation to getting the appropriate mortar consistency, is equally crucial and helps to create a brick wall that is strong and long-lasting. A professional must build any masonry wall intended to be structural or load-bearing. However, a DIY method might be a great way to save money and get more expertise when making a plain backyard brick wall. We've put up a step-by-step tutorial below to help you get started if you're unsure where to begin. And if you are looking for some expert’s assistance regarding Brick pointing Brooklyn, then NY Construction Co is the name you can trust for the experience and expertise.
Repointing brickwork involves replacing the exterior layer of the mortar joint that holds the bricks together. It's time to consider repointing if open joints can be seen around the mortar bed.
The material that separates individual masonry pieces (such as bricks or stone blocks) from one another is called mortar, and it is crucial. It prevents water from entering the structure and smooths out any blemishes on the bedding faces of the bricks or blocks (the bedding is the mortar used to bind the bricks to one another.)
Two central tenets of repointing are working in tiny parts and replacing the old with the new. Old mortar shouldn't be completely removed from a wall at once since doing so might compromise the strength of the structure. Remove the old mortar from the horizontal and vertical joints by working your way along the wall in a space between three and five feet wide.
Give your brick wall a thorough wash down, then leave it for the night. This will ensure that the old mortar and bricks are moist and won't absorb water from the fresh mortar you'll apply between them the following day. Once the new mortar is ready to be installed, gently spray the bricks one last time before starting.
However, if your home is older, you should use a different mixture of lime and sand. It is recommended to utilize the same mix as what was initially used in brickwork as a replacement. This is because Portland cement mortar can break older bricks since it becomes tough after drying. The lime mixture bends with the wall as it flexes, cushioning the brick much like the discs between the vertebrae in the spine.
Work tiny quantities of mortar into the horizontal and vertical spaces between the bricks with a pointing trowel after picking up some mortar with a big scoop. Use the trowel's flat edge to level out your work and remove any mortar that accidentally gets on the bricks' faces.
Scrape off any mortar left on the brick face after waiting approximately an hour for the cannon to solidify somewhat. You may accomplish this with a reliable wire brush but sweep horizontally to prevent yanking the fresh mortar from the seams. Give the wall a daily spray over the following three to four days to let the mortar dry gradually and avoid cracking.
Feel free to reach out to us anytime with any of your doubts and we will be more than happy to assist you.
