If you are in the market to get new cabinets installed, you probably need to know how much it will cost you. That depends on the material you choose for the installation, among other factors. In this blog post, we will discuss all the aspects of cabinet installation in NJ that add up to the final cost.

How Much Cabinet Installation in NJ Costs

Let’s begin with a discussion of wall cabinets, as they are the most affordable.

Wall Cabinets are The Least Expensive Option

Wall cabinets come in a variety of sizes and styles. They typically come in a 12-inch height range, with depths ranging from 12 to 24 inches. Widths are also available in 3-inch increments. While these units are inexpensive, they usually have only a few different styles.

The cost for wall cabinets varies, but in general they are the least expensive choice for cabinet installation in NJ. They cost between $200 and $500 per linear foot. Installation can be a breeze with wall cabinets because they are anchored into the wall. However, these cabinets are not as sturdy as solid wooden cabinets. They cannot be refinished and do not perform as well in high heat and moisture conditions.

Wall cabinets are not the only affordable option you have.

Particle Board is A Good Choice for Cabinet Installation in NJ on A Budget

If you are on a tight budget, particle board is an excellent choice for cabinets. It is cheaper than solid woods and can be enhanced with a laminate or wood veneer. Solid wood is usually more expensive than particle boards due to the quality of timber used. Unlike particle board, however, solid wood is not likely to warp, split, or break under changes in temperature.

While particle board is a very budget-friendly option for cabinetry in NJ, it has many disadvantages. Particle board is not very durable and does not hold hardware well. Additionally, it is not resistant to moisture, so it swells easily when it contacts water. Fortunately, there are now cabinets made from thermofoil, which combines the best characteristics of particle board and MDF. These cabinets are available in woodgrain or high-gloss finishes.

Wood Veneer is More Expensive Than Thermofoil

If you are considering upgrading your cabinets, you can choose between wood veneer and thermofoil. Both options are made from thin layers of wood that are glued together and laminated to create an authentic wood-look finish. Although wood veneer is more expensive than thermofoil, it is less likely to chip, warp, or break than thermofoil. It is also easier to maintain and can be easily repaired if necessary. However, if moisture seeps into the cabinet veneer, it may bubble or peel off.

It is important to choose the right material for your closet design NJ, and then choose a finish that will last for years. Some finishes are better than others, so consider your budget when choosing your finish. Paint can give your cabinets a smooth, modern look. It also hides dust very well, but be sure to avoid lower-quality paints, as they crack easily. Additionally, painted cabinets can be more difficult to repair than stained ones. A stained finish will also help highlight the natural wood grain in the cabinets.

DIY-Friendly Options

If you want to save money on closet design New Jersey, there are several DIY-friendly options to consider. First of all, repainting cabinets can save you a lot of money. The cost of new cabinets is high because of supply problems, but repainted cabinets are cheaper.

Before installing cabinets, it is important to mark the location of the studs. You can do this by using a pencil and extending the lines using a carpenter’s level. After you have marked the stud locations, transfer these marks to the back of each cabinet. You should then drill pilot holes at the top and bottom of each cabinet, so you can attach it to a stud more easily. You can also use a painter’s tape to mark the studs.

Cost of Crown Molding

The cost of crown molding is affected by several factors, including the material used, the amount of work needed, and the length of the molding. Generally, smaller molding profiles cost less. Larger, more complex moldings cost more. Plaster moldings cost more. Prices vary from approximately $1.50 per linear foot to more than $30 per linear foot. Crown molding installation services can also add an additional hour of labor to the total cost.

If you want a custom-made molding, you should hire a carpenter, since it can be difficult to install on your own. Additionally, hiring a carpenter is an excellent option if you plan to use difficult or exotic hardwoods. This is especially important if you're doing a historical restoration. The first step to hiring a carpenter is measuring your walls. Add up the number of linear feet, and make sure to take into account chimneys, alcoves, and other architectural features.

The Bottom Line

The cost of cabinet installation NJ in a home may vary from a few hundred dollars to several thousand dollars. Before hiring a contractor, you should receive a written estimate. This estimate will give you a basis for interest and information regarding the cost of the project. The estimate should cover all areas of cost, and you should ask any questions before signing a contract. Hire Cabinets Floors N More for your cabinet installation in NJ and you will be delighted with the results that will be in your budget!