If you've not completed the examination described in the previous article, How to Clean Your Case, now is the perfect time to take the time to do it. Examine the blades of the fan at front of the laptop computer. Take a look at the vents. Are there dusty clumps there? Do you see any grime clinging to it? If yes, then the inside must be cleaned. The fan's blades appear clean, but it's been a while since you've cleaned the motherboard or your computer is in close proximity to smoking cigarettes, it needs to be cleaned up anyway. Dust and particles that are in the air (like cigarettes) may build up on the motherboard's circuitry which can cause the motherboard to get hot or corrode. Motherboard provided World PC Tech
The first thing you should remove the computer's power cord. After that, open the case in order to gain an access point to your motherboard. Cases open in different ways. If you aren't sure what to do to unlock your box, examine the back of your laptop towards the edges for screws. The screws could be attached to the sides or an upside-down U shape panel that covers the sides as well as the top. The removal of the screws allows you to remove the cover. Some cases also have screws located on their fronts. To gain access to the screws, you need to first remove the front cover by pressing a concealed latch. The cover is intended to allow easy access to the internals of your PC, so If you are looking with enough focus you'll be able to determine the best way to get it off.
Make sure that you don't contact anything on the motherboard you must be grounded touching the framework of your computer using your other hand , or using a special grounding device.
The purpose of cleaning of the motherboard's components is to eliminate any dust and dirt from the motherboard as well as all other components within the case. It can be accomplished by using one of three techniques.
The most effective technique is using a container filled with compressed air and blow it away. Make sure to hold the can in a straight position to stop the propellant chemicals that could damage or corrode parts from escaping. Dirt and dust should be removed off the motherboard, and removed from the case.
Another method to get rid of dust is by using vacuum. It is recommended to use only the battery powered vacuum as the AC powered vacuum can cause static, which can damage the motherboard. I've utilized an AC powered vacuum (before I realized this wasn't advised) for cleaning my motherboard a few times, and it has not caused any problems, however, I might have been fortunate. If you are using the vacuum make sure to keep the nozzle about two inches off the motherboard and any other components to ensure that it doesn't come into contact with them, and to ensure that any small pieces aren't sucked up by the vacuum.
If you don't own a compressed air canister or a vacuum cleaner, you can employ a dry, clean cloth and a brush to clean the motherboard. Be careful not to rip or break anything with this method. https://worldpctech.com/learning-guides/whats-the-best-way-to-clean-a-motherboards-components/
When cleaning your motherboard, take care not to cut any connections or cables or parts that are loose, like jumpers.
Cleaning the interior of the case that goes across the entire components from the motherboard's one side to the next and any other components. Be sure to clean the heat sinks and the fans. Don't open your power supply, or place anything else inside it other than the fan. In the event that you did, you might receive a shock, and destroy your computer.
If your laptop or computer does not perform after your put it together again, there is a reason. Something was clearly loosened during the cleaning. The case should be opened and place the connections as well as cards back into their slots. Examine the case for any signs that be disconnected. Visit Link
Cleaning your motherboard is likely the most hazardous type of cleaning however it is vital to prevent premature loss for your PC.