Disclaimer: This is a user generated content submitted by a member of the WriteUpCafe Community. The views and writings here reflect that of the author and not of WriteUpCafe. If you have any complaints regarding this post kindly report it to us.

Connect ij.start.canon printer to Mac

ij.start canon Printers come with a lot of different purposes and features. They are well-matched with various operating systems. You can get a Canon Printer to complete your printing and scanning needs at home or offices. You can smoothly set up your ij.start canon Printer on the Mac computer without any complications. Let’s take a fast look on the hardware setup before going to the Mac setup.

Canon Printer Hardware Setup

The hardware setup steps are comparable in virtually all Canon printers

  • Begin your hardware setup by unboxing your Printer
  • Following this, remove all the packing materials like the plastic tape and sheet from in and around the printer
  • Next using the power cord attach your Canon Printer connect to an electrical hole
  • After turning on your Canon Printer, insert the ink cartridges into their individual slots
  • After that, load the paper in the input tray and then, open the output tray and if existing, pull out the tray extender

Lastly, print the position page and entire the basic setup process

ij.start canon Printer Setup for Mac

You can complete the ij.start canon printer setup for Mac using any of the methods given below

Wireless Setup Wizard

  • At the start tap or press the ‘Wireless’ button on your Canon Printer control panel
  • Next choose the option ‘Settings’ and select the ‘Wireless Setup Wizard’ option
  • After that all the available networks will display on your control panel screen
  • From the list choose your wireless network and connect to it by toward the inside your WEP or WPA network key.

 

WPS Push mode

Before going on with this setup mode, make sure that your Canon Printer and your network router have the WPS push button stipulation

  • Drive and hold the ‘Wi-Fi’ button on your Canon Printer until the Wireless light starts to flash
  • Next this, find the WPS push button on your Wireless router
  • Push the WPS button and hold it for a only some seconds
  • Finally, your Canon Printer will start pairing with your wireless network

 

Software Installation

  • On your Mac computer open a web browser and navigate to Canon.com/ijsetup or ij.start canon 
  • In the webpage, enter your Printer model
  • Next this, download driver to your Mac computer
  • Lastly, open file and complete your Canon Printer driver installation process by following the simple on-screen directions

For any further queries or support regarding ij.start canon Printer setup for Mac visit Canon.com/ijsetup site.

0

Login

Welcome to WriteUpCafe Community

Join our community to engage with fellow bloggers and increase the visibility of your blog.
Join WriteUpCafe