LED Flood Light, also known as LED flood light, LED spotlight, LED projection light.
Many people don’t know how to install and use it after buying it. Please refer to the steps below（how to install outdoor led flood lights）.
First, before installing the LED floodlights, in order to ensure the quality of use after installation, it is recommended to conduct a detailed inspection of the floodlights present before installation.
Look at whether the appearance of the LED flood light is damaged, whether the accessories are complete, how is the after-sales service, etc., each item must be carefully checked.
Second, after the appearance is not damaged and the accessories are complete, it is necessary to prepare for installation after the LED floodlight arrives at the construction site.
First, organize the installers according to the installation drawings attached to the factory, connect a few floodlights to try if the installation drawings are correct or not.
If conditions permit, you can arrange a trial lighting for one person one by one, so as to avoid taking it upstairs and installing it, which will be broken after installation, and then to be dismantled to reduce labor costs.
The third is to remind the installers of the importance of fixing and wiring, especially the waterproof of outdoor wiring is very important, it is best to review it when fixing and wiring.
Fourth, after the LED floodlight is fixed and connected, it is best to use a universal meter on the main power supply when it is ready to test the light.
Check whether there is a short circuit in the wrong wire.
Fifth, after all the LED floodlights have been tested, try to light them for as long as possible,
and check again on the second and third days. After doing this, everything is good, and there will be no problems later. NS.
Precautions
1. Please read the LED flood light manual carefully before use.
2. Non-professional and technical personnel, please do not repair or modify the product without authorization.
3. Please turn off the power before installation to avoid electric shock due to improper operation.
4. Before installation, please pay attention to check whether the voltage marked
on the floodlight is consistent with the input voltage to be connected, so as not to damage the LED floodlight.
5. If you find that the lamp body wire is damaged, please cut off the power immediately and stop using it.
