A house consists of various areas on the outside like a garden, garage, storehouse, pathway, etc. These areas are often more prone to bear damage so they need vertical modern metal siding. This type of siding is commonly termed as the steel siding. You can use these sidings for workshops, sheds, and barns because of their functionality.
These sidings are more functional in such areas when compared to traditional sidings or fancy sidings. Metal siding on houses is easy to install and is very durable. It can last for a long time once installed. This blog is here to address the main question which is how to install vertical metal siding.
Let us begin by knowing more about vertical metal siding first
About Vertical Metal Siding
The vertical metal siding is often considered for the outer areas. It can withstand the strikes and is a low-maintenance option. These sidings can be made up of various materials like aluminum, steel, and copper. Once the material is chosen you can choose the colors as vertical metal sidings are available in various colors as well. You can wonderfully enhance the aesthetics of your house by blending the color combinations well. You can match up the sidings in a contract fashion or simply get the plain neutral color shade.
Installing steel siding or aluminum has the same procedure. The best part about installing these sidings is you can DIY! These sidings come in an attractive structure as well and they have a ribbed texture to increase durability. This ribbed pattern also makes it easier to create an overlapping look when installed side to side. Hence, vertical siding is more popular than horizontal metal sidings.
Now that you know what is vertical metal siding, how to put up metal siding is the next question that needs to be answered.
Metal Siding: How To Install?
Let’s plunge into the details of metal siding installation. First of all, you need to understand that every manufacturer has mentioned different installation procedures for the sidings. There can be numerous methods of installation for metal sidings. These methods are either material specific or they are to be installed using fasteners.
Also sometimes when the design is different you will have to follow the instructions given by the manufacturer in the manual. But here we would like to focus on the commonly used vertical metal siding and material for explaining how to hang the metal sidings.
The procedure that we will explain here is useful for barns, sheds, and garages, likewise.
You will need the following
- Hammer
- Metal Shears
- A marker or chalk
- Level
- A nibbler
- Drywall square
- Additional helpers from family and friends
- Safety gear for you and your helper
The safety gears are essentially important for you when you plan to install the sidings on your own. These sidings are sharp and installation also requires a lot of tools hence you should ensure your safety before starting with installation. If you are not sure about the DIY installation you can simply hire siding contractors in Kennesaw for professional help.
Steps to Install The Sidings
- Level
You have to first check for the level and draw a straight line with reference on the ground surface as the first step. This level line will be drawn around the entire building, then you have to draw a plumb line using the framing level and mark it on each corner.
The plumb line here will hint toward the location of the outer corner trim. If there exists any door or window a J channel can be added.
- Panel Installation
It can be a wise step to start the installation by using half a sheet for the installation. This way you can figure out how it can match up and align with the other half. This part is crucial you must ensure that the sidings are not accumulating any water. By using the fastener you can attach the panels to one another carefully. The plumb line and the level markings act as a guide for the panel installation here.
Installation of the outside corner trim has to be done post-installation of the panels. After this step, you need to install the base strip at the bottom of the panel.
If you have found out at the end that there exists a problem in your installation contact Siding Depot for any siding repair in Marietta GA.
Conclusion
In this blog, we have given the explanation for DIY vertical metal siding installation for you. Although there are various types of sidings available in Marietta you can choose from a wide range of materials as per your requirements. You can find steel, aluminum, copper, and vinyl siding in Marietta. Installation is not an easy job but if you are determined to do it yourself this blog can surely help in doing it.
There is a variety of metal sidings available in the market to make your exteriors look more creative and aesthetic. Check for all the varieties and quality available to install the best ones in the house’s outer areas.
Disclaimer- The information provided in this content is just for educational purposes and is written by a professional writer. Consult us to know more about metal sidings.
