When it comes to long-term water storage, a water bladder tank is exactly what you need. Whether 50 or 5,000 gallons, a bladder tank keeps your water safe and easily accessible. It’s perfect for both residential and industrial uses. If you’re preparing your bladder for long-term use, here are five steps you need to take to ensure your water stays safe and clean.
Empty and Clean Your Water Bladder First
The first step is emptying the bladder out. Whether it’s been full for a day or a month, if you’re preparing for long-term storage, you want to start with a clean slate.
To clean out the bladder, fill it with a solution that’s approximately one ounce of bleach for every 10 gallons of water. Let the solution sit for a few hours for a thorough cleaning. Then, empty it and flush the bladder with fresh water.
Now, you’re going to want a dry bladder. If the weather allows, setting it in the sun can help evaporate residual moisture. Suspending the tank with the discharge port at the bottom can also help with drainage. Either way, wait until all the water is gone completely, and then you can start filling it for storage.
Don’t Refill It to the Max
If you’re storing water for an extended period, you don’t want a bladder that’s 100% full. It can put unnecessary strain on the material, and unintentional freezing can cause more damage.
Instead, fill the bladder to 90 or 95%. That way, it has the perfect amount of give for long-term storage, and you still have plenty of water ready to go.
Cover and Protect Your Bladder
Regardless of how strong the material of your water storage bladder is, you’ll want some extra protection over the long term.
First, lay down a ground pad underneath the bladder. This helps protect against sharp debris that may be on the ground.
Second, a cover over the top of the water tank protects it from UV rays and can also help prevent microbial growth.
Pick Your Storage Location Carefully
Where you store your bladder is crucially important for long-term storage.
It should be dry and insulated, especially if you’re storing water through the winter. This helps minimize the risk of mold or freeze damage. Also, make sure the area isn’t heavily trafficked but it should still be easily accessible. When you need water, you don’t want to struggle to get it, but you don’t want the tank to be in the way, either.
Build a Check-Up and Testing Schedule
Water storage isn’t something you can set up and forget. It still requires maintenance and scheduled check-ups. The good news is if you plan your schedule now, you won’t forget about it in the future.
First, you’ll want to check with your local water quality office to make sure you’re meeting quality, treatment, and testing standards. Then, decide which days you’ll check and test the water. It could be the first Saturday of every month or once every two weeks. This will give you peace of mind and help you maintain clean and drinkable water 24/7.
About AIRE Environmental
If you want equipment that works as hard as you do, you need AIRE Environmental, formerly known as AIRE Industrial. Designed and manufactured in the USA at their headquarters in Meridian, Idaho, AIRE Environmental’sproducts hold up to the toughest tests. From Dewatering Bags to filter turbid water on the job site to Spill Containment Berms that stop chemicals in their tracks, AIRE Environmental helps your job run smoothly. They design their products with durable materials and tough-as-nails welded seams. No matter what your industry, your job site deserves AIRE Environmental. It’s the best way to ensure everything goes according to plan. There’s no job too big or too small. With AIRE Environmental, you can handle it all.
Get the best water bladder for long-term storage at https://www.aireenvironmental.com/
Original Source: https://bit.ly/40aYxuv
