Latest dealsDeals See all deals→
How to Protect Your Shoes and Boots From Rain, Snow and Road Salt

How to Protect Your Shoes and Boots From Rain, Snow and Road Salt

Walter's Shoe Care
Walter's Shoe Care
October 16, 2026 5 min read

Wet weather is hard on footwear. Rain soaks into the material, snow melts into slush, and road salt dries into white rings that can be difficult to remove. Anyone who lives somewhere with real seasons knows how quickly a good pair of boots can look tired after one rough winter.

A little preparation makes a big difference. Here is how protective sprays work, how to apply them properly and how to look after your shoes after they have been out in bad weather.

Water repellent vs. waterproof: an important distinction

It helps to set expectations. A protective spray is water repellent, not fully waterproof. It coats the surface fibres so that water beads up and rolls off rather than soaking straight in. That helps against rain, puddle splashes, light snow and everyday spills.

It does not turn a pair of shoes into diving boots. If you will be standing in deep water or slush for hours, you need footwear that is built to be waterproof, plus a protector as an additional layer of defence.

How water repellent spray works

Most sprays leave an invisible coating on the surface of the material. That coating lowers the surface tension so that water forms droplets instead of spreading and soaking in. It also helps prevent dirt and stains from penetrating, which makes later cleaning easier. A good protector should not noticeably change the look or feel of your shoes.

How to apply protector spray correctly

  1. Start with clean, dry shoes. Spraying over dirt locks it in. Brush off dust and clean the shoes first, then let them dry completely.
  2. Check the label. Different products suit different materials. Walter's Waterproofing Spray for Shoes & Suede (Eco Protect) is a water-based protector formulated for leather, suede and nubuck, while other water repellent sprays in the range cover a wider set of materials.
  3. Test a small area. Spray a hidden spot, let it dry and check that the colour has not changed.
  4. Spray evenly. Hold the bottle at the distance recommended on the label and use light, even passes, covering seams and stitching, which are the most common entry points for water.
  5. Let it dry. Allow the shoes to dry fully before wearing them. Many sprays need time to cure.
  6. Apply a second light coat if needed. Two thin coats usually do better than one heavy one.

As a guide, reapply when you notice water no longer beads on the surface, and always after a deep clean.

Material-by-material tips

Suede and nubuck

These are the most vulnerable materials, so protection matters most here. Brush the nap lightly before and after spraying. If you are starting from scratch, the suede shoe cleaning kit includes a protector spray, a brush and a cloth.

Smooth leather

Protector helps prevent water spotting, but leather also needs conditioning to stay flexible after exposure to moisture. Explore our Leather Care Products for conditioners and cleaners.

Canvas and fabric sneakers

Fabric soaks up water quickly, so a protector can noticeably reduce staining and dampness. Reapply more often, since fabric surfaces wear faster.

What to do after a wet or salty day

  • Remove surface slush and dirt. Wipe the shoes with a clean, damp cloth as soon as you get in.
  • Deal with salt promptly. Salt marks are easier to remove when fresh. Wipe gently with a cloth dampened with lukewarm water, then blot dry. On suede or delicate leather, test first and use a cleaner made for the material.
  • Dry slowly. Stuff shoes with paper, change it when damp and leave them at room temperature. Avoid radiators, heaters and hairdryers, because heat can crack leather and warp soles.
  • Condition leather once dry. Moisture and salt dry leather out, so follow up with conditioner.
  • Rotate pairs. Give each pair at least a day to dry fully.

A quick note on formulations

If product formulation matters to you, check the label and product page before you buy. Some of the protector sprays in the Walter's range are listed as PFOS and PFOA free, and the non-aerosol Eco Protect option is water-based, which can be a good fit if you prefer to avoid aerosols.

Summary

Protect before the weather turns, clean up after it, dry slowly and reapply regularly. Those four habits will add a lot of life to your footwear. You can browse the full range of water repellent spray options from Walter's, a Canadian shoe care brand with more than a century of experience.

Author bio

Walter's Shoe Care is a Canadian, family-run shoe care brand founded in Montreal in 1893. The company makes cleaners, protectors, conditioners, insoles and accessories for leather, suede and sneakers. 

Similar Reads

Browse topics →

More in How To

Browse all in How To →

Discussion (0 comments)

0 comments

No comments yet. Be the first!