Once you've started extracting oil and gas from wells, you need to ensure that the work is carried out in full swing and the environment is also not harmed for best results. One such process that can be costly and time-consuming to your company is swabbing.
But swabbing is also not something that can be ignored. If the oil and gas cannot be extracted to their full potential, it would also lead to loss and wastage of resources. Therefore, if possible, most companies try to reduce the swabbing in Grande Prairie.
But how to reduce the swabbing in Grande Prairie? The answer to this question is mentioned in detail in this article.
Why do you need to reduce swabbing in Grande Prairie?
Swabbing in Grande Prairie is responsible for the emission of huge amounts of Methane. Did you know that when you do a swab in Grande Prairie for a single well, it will release 80 to 1,600 thousand cubic feet of Methane every year?
If the swabbing needs to be done multiple times, you can imagine the amount of Methane it would release. Hence, it is important to ensure that swabbing in Grande Prairie is reduced to protect the environment and save some cash.
How to minimise swabbing in Grande Prairie?
The best ways to minimise swabbing in Grande Prairie are listed below.
1- Withdraw from the well at average speeds
Major problems of swabbing can be avoided if the speeds are monitored regularly. If the operator withdraws from the well quickly, it affects the pressure balance inside the well. This results in a significant pressure drop.
When the balance is well maintained, it ensures that the well is controlled properly, and the need for swabbing in Grande Prairie is reduced drastically.
2- Pump the fluids instead of pulling from the well
Monitoring the speeds is essential to minimise swabbing. You can also reduce its impact when you pump out the fluids. When you pump the fluids out instead of pulling, it does not damage the well resulting from depressurisation.
3- Maintaining proper control over the well
Once you get full control over the well by whatever means necessary, you can prevent the chances of swabbing.
When you take control of the well, ensure that all the systems are working properly. Before jumping to conclusions and deciding you need swabbing, always have a plan of action to control the situation.
4- Checking the mud
The mud condition will tell you a lot about the condition of the well and is there a need for swabbing. If the mud has high viscosity or gel strange, the conditions you're working on are poor and might need swabbing. Hence properly check the mud, provide the necessary lubrication, and you'll be good to go.
Final thoughts
Andrew Jacobs is the author of this article. If you're looking for professional swabbing services in Grande Prairie, contact us at Swab Pro.
