1. Science / Technology

How to Reset Brother Printer: 3 Different Methods

Disclaimer: This is a user generated content submitted by a member of the WriteUpCafe Community. The views and writings here reflect that of the author and not of WriteUpCafe. If you have any complaints regarding this post kindly report it to us.

Sometimes, it is very difficult to understand what the actual problem is with your printer. There are some specific errors that can be solved by resetting the printer. If you are facing any such issue with your Brother printer, you can reset it. To learn how to reset Brother laser printer, you can follow this blog.

Being an avid user of Brother printers, I have faced such problems multiple times. In most cases, resetting the printer helps fix the error. So, if you are having a similar issue with your printer, you should not worry. Continue reading this post, and you will learn everything you need to know.

When Do You Need to Reset Your Brother Printer?

There are certain problems that may occur while using a printer. Before you find out how to reset Brother laser printer, you should know what those issues are. When you know what kind of error the printer is facing, you will know what type of reset you need. Here, I am writing down the problems that may require a reset:

● When you have poor printing quality, faded prints, and other printing issues, you will have to reset the printer.

● If you change the internet connectivity or WiFi router, your printer will have connection issues. In that case, reset the printer to recognize the new network.

● When you have an error code, then you will need to reset the printer.

● If you want your printer to go back to its original settings, you will have to do a factory reset. It may be needed when you customize your printer and it starts having printing issues.

Method 1: Factory Reset

If you want to reset all settings or perform a factory reset, you can do so using the buttons or the settings tools. To reset, you should follow these instructions.

  1. To get started, you should turn the printer off.
  2. Next, you have to press the feed button and the power button at the same time for around 3 seconds. You will see that all the LED indicators started flashing red.
  3. Then, you have to continue pressing the power button and press the feed button three times so that all the settings and device settings can be reset.
  4. On the following screen, you will see all the lights turn red.
  5. After that, release the power button.
  6. The LED indicators will flash red four times and then remain red.
  7. Finally, the settings have been reset by now.

Method 2: Reset Using the Touchscreen

If you want to perform the process of how to reset Brother laser printer, you can do it by using your printer screen. Remember, your printer screen needs to be a touch screen to reset it using the screen. Follow these instructions.

  1. In the beginning, go to Settings.
  2. Next, open All Settings and Standard Settings afterward.
  3. After that, select the Reset option and tap OK.
  4. Now, tap the OK option and hold it for five seconds. The printer will start resetting itself. You have to wait for some time, and the reset will be complete.

Method 3: Reset Using the Buttons

In case your printer does not have a touch screen and you want to know how to reset Brother laser printer using the buttons, follow the below-written steps, and you will be able to do it.

  1. The first thing you have to do is unplug the printer from the electric outlet and turn it off.
  2. Wait for about a minute and plug the connector back into the outlet, but make sure you do not turn the printer on.
  3. After that, press the Go button and hold it.
  4. Continue holding the Go button until the printer lights turn on, and then release the Go button.
  5. Next, click on the Go button 10 times and wait for around 2 minutes.
  6. The procedure of resetting the printer is complete.

Conclusion

After reading this blog, I am sure you have learned the process of how to reset Brother laser printer with ease. With the help of the guide, you learn what are the situations when you need to reset your printer. Also, what kind of reset you need based on the issue your printer has, and how you can resolve it. You can go for a factory reset, reset it using the screen, or use the buttons to reset it.

Frequently asked questions

How can I reset my Brother printer manually?

If you want to reset your printer manually, you should follow these easy steps:

  1. Disconnect the electrical outlet and turn the printer off.
  2. Unplug the power cable from the socket.
  3. After that, wait for around 30 seconds.
  4. Then, plug the cable back into the socket.
  5. Again, turn the printer on.
  6. You are ready to work on the printer again.

How do I know when I have to reset my Brother printer?

There are certain things that will determine if you should reset your Brother printer or not. For example, if your printer is not printing properly and producing poor-quality prints, you will have to reset it. If you change the internet connectivity, then you may have to reset the printer to detect the new connection. Plus, if you made a few custom changes and started having issues, resetting it to default settings may be necessary.

Do I need to restart my Brother printer to fix connection problems?

Sometimes, if you disconnect the power supply from your printer and then plug it in again and turn the printer back on, it can resolve issues. If you are facing an error with the printer or a power supply, turn off the printer and unplug it, then plug it back in and restart the printer. Then, give the power back by putting the plug back in and restarting the printer. These simple steps may solve the problem.

Read moresupport.brother.com/windows

brother printer wireless setup

brother printer support

brother printer drivers

brother printer drivers mac

Sourcehow to reset brother laser printer

https://www-supportbrother.com/

Login

Welcome to WriteUpCafe Community

Join our community to engage with fellow bloggers and increase the visibility of your blog.
Join WriteUpCafe