How to Setup the HP Printer Wirelessly with CD Using 123.hp.com/setup

Setting up an HP printer wirelessly can be a bit more complicated when using a CD, but with the help of the website 123.hp.com/setup, the process can be made much easier. Here is a step-by-step guide on how to set up your HP printer wirelessly with a CD using 123.hp.com/setup.

Step 1: Make sure that your computer and printer are both connected to the same wireless network.

Step 2: Insert the CD that came with your printer into your computer's CD drive.

Step 3: On your computer, open a web browser and go to the website 123.hp.com/setup.

Step 4: On the website, you will be prompted to enter the model number of your printer. If you don't know the model number, you can find it on the printer itself or in the manual that came with it.

Step 5: Once you've entered the model number, you will be taken to a page with instructions specific to your printer. Follow these instructions to download and install the necessary software.

Step 6: Once the software is installed, connect your printer to your computer using a USB cable.

Step 7: Run the software and follow the prompts to complete the setup process. This will likely involve configuring your printer's wireless settings, so make sure you have your wireless network's name and password handy.

Step 8: Once the setup is complete, disconnect the USB cable and you should be able to start printing wirelessly.

By using the website 123.hp.com/setup and your printer's CD, you can easily set up your HP printer wirelessly. The website provides detailed instructions and resources to help you through the process, and the CD provides the necessary software. If you encounter any issues during the setup process, refer to the website or the printer's manual for further assistance.