Disclaimer: This is a user generated content submitted by a member of the WriteUpCafe Community. The views and writings here reflect that of the author and not of WriteUpCafe. If you have any complaints regarding this post kindly report it to us.

How to sharpen your knife on a whetstone?

With all the cutting and hacking, your knife may lose its sharpness, and it very well may be an ideal opportunity to sharpen your knives however you know how to do as such! At that point read on to realize how to get an ideal edge for your knife at home.

Knives are a culinary specialist& closest companion and on the off chance that their edges are not entirely sharpened, might hurt them. Thus, we need to ensure that the knives are sharpened constantly.

A Knife with a sharp edge will make your life a lot less difficult and make cooking a better experience. A sharp edge simply improves everything. The best strategy to Sharpen a Dull Knife at Home is through whetstone.

What is a Whetstone?

Nothing can sharpen your knives better than a whetstone. Sharpening stones or whetstones are utilized for sharpening the edges of your knife for it to work impeccably fine. Most of the individuals confuse “whet” with wet, which isn't right. “Whet” fundamentally intends to sharpen cutting edges. “Whet” is a word from early English that is rarely used any longer. Thus, individuals realize the whetstone as a sharpening stone. Unlike common stones, whetstones needn't bother with any grease to sharpen your knives. The twofold sides of this stone comprise grating coarseness and a fine coarseness to sharpen the knives flawlessly.

How to use a Whetstone?

The best part of a Whetstone is that you don’t need oil to sharpen your blades. Before you start the process of sharpening your knives, a Whetstone needs to be soaked in water. Hold the stone under the water until the air pockets delayed down, totally disappear or for around 5-10 minutes at that point it's prepared for use. Beginning with the least coarseness (this may from one stone to another), hold your knife at around a 15-degree angle and slide it away from you. Put a light pressing factor alongside the strokes. You don't have to push excessively hard.

Tenderly slide from the tip to the foundation of the edge. After around 12 to 15 strokes, flip the edge over and rehash on the opposite side of the stone. Remember to hold the blade at about a 15-degree angle. You can get the idea about the angle with the help of your thumb, 15 degree angle is about half the height of your thumb. Don't forget to keep the moves consistent and at the same speed.

Now, you simply need to flip the stone over and utilize the fine course side. The greater part of the Whetstones accompanies a decent wooden base that helps to hold the stone set up while sharpening. Before beginning, you should add somewhat more water to the surface. Presently with the fine course stone, finish the sharpening cycle like before at a similar cutting edge angle and pleasant reliable passes along the stone. Around 10 to 12 passes would be acceptable before changing it to the opposite side of the edge. Now, the edge ought to be amazingly sharp.


Sharpening a knife initially can seem to be a dreadful task, but with these steps, it would become easier for you to sharpen knives like a pro. So, now that you’ve got the guide on “How to sharpen knives with the whetstone” you should consider ordering the best one that comes along with a wooden board.


Welcome to WriteUpCafe Community

Join our community to engage with fellow bloggers and increase the visibility of your blog.
Join WriteUpCafe