Stuck behind your wheels are brake calipers. They perform a significant function of generating friction that brings your car to stop. To operate efficiently, all the brake components should come in contact with one another to cause the required friction.
In a nutshell, for a braking system to work correctly and safely, the compounds need to be able to move freely. Concerning the importance, Wilwood Brake Calipers are an essential part of the whole braking system and are why their dedicated repair and maintenance are crucial.
Brake calipers house the brake pads, pistons, and calipers, helping push the pads into the brake rotors when you apply the brakes.
Reasons For Brake Calipers To Go Bad
Your brake pads and rotor should be replaced more often than your calipers. Neglecting this phase will hurt the calipers on a significant basis. Remember that worn pads allow heat buildup that could wrap your rotors and calipers. In addition, salt, dirt, and road grime can corrode the parts as well, either weakening them or causing them to seize up.
With the lack of lubrication, a few things start to happen:
* Brakes are not in contact with the rotor correctly. Brake pads tend to wear unevenly
* Your brake stopping power can also become weak due to the brake pads not hitting the full surface of the brake rotor
* Slide pins tend to stick, causing heat buildup, and wearing the brakes down even faster.
How To Know When They Need Work
When the vehicle's driver presses the brake pedal to stop the vehicle, if the pull in the left or right direction is experienced, it is possible that a brake caliper is responsible for this. While the other components of the vehicle can also cause this to happen, the particular case for the caliper repair is considered as it has the majority of chances.
When a brake caliper technician services the brake system on the vehicle, a technician retracts the pistons to install new brake pads. If any problem is noticed, it is essential to correct it by either repairing or replacing the brake calipers.
Servicing your brake calipers includes cleaning and lubricating the slide pins. The experts clean the pin to remove any grease or debris and inspect for rust. Then they apply the heat-resistant lubricant to the pin. This process takes under an hour, and the experts also check your vehicle's disc and drums while we're at it.
It's suggested to use the cleaning fluid specifically designed for the calipers; otherwise, your brake calipers will be damaged.
Conclusion
Your brake calipers are a vital part of a fully functioning brake system. Make sure you consider its maintenance frequently to keep it in optimum health.
0
