Disclaimer: This is a user generated content submitted by a member of the WriteUpCafe Community. The views and writings here reflect that of the author and not of WriteUpCafe. If you have any complaints regarding this post kindly report it to us.

Now that is how you'll motorcycle bodywork will break very easily you just bash it on the ground then inches cracks so does that so the plastic mould is back on if you get it if I understand where I am you're getting personís the actual process of doing it yourself I use cable ties because to be quite honest a plastic cable type is the same material as your bodywork about some bodywork is fundamentally made from nidal it's an injection, not an idol and compost is really boring Metal Corner Brackets unless you've got certain lover leaves which are fibreglass but you'll know that you can finally awesome it's really easy the 911 easy the best thing once we start with these lighting to do whatever I use a clay long time you and as you know you cut off the lion's share of it you slip it off once it's done up and you've got that much it goes in the bin well I say go much up remove the toolbox. Large metal corner brackets, Metal corner brackets for wood, Heavy-duty metal corner brackets, Long metal corner brackets, Metal corner brackets Screwfix, Decorative metal corner brackets, Corner brace brackets, L brackets. 

Outdoor screws Screwfix, Railway sleeper brackets, Screwfix railway sleeper brackets, Railway sleeper brackets b&q. And I've got loads of them and they cost nothing there so I'm going to use one of these and all this can you see that happen on that crack in the corner that is typical of the kind of crack you'll get the bodywork or in a piece of plastic we're going to plastic well there is share stuff first thing we need to do though is to consider safety see these plastics are made from various chemicals and oils polymers that sort of thing I'm not a chemist I don't know maybe one you guys a tempered main amp I do know when you burn this stuff it's a bit like a burning foam or sofa he's pretty dangerous they emit gas and an in most of the different gases that will come out of that when it's burning is that this hydrogen cyanide isn't just dangerous it's downright deadly it will kill your environment that's got no ventilation Outdoor Screws so we're opening Garrett's door for this  I'm going to make it nice and ventilated in here with a sticker mask.

While I do it I'm going to try just to get started just to show you the basic principle and then once we get away and I'm showing it I'll get the mask on and you see how stuff puts these persons so good man when you got your iron actually that's not going to do clay overdone away with this toggle I'm talking mostly short lead doesn't show you first of all just on the actual plastic itself if I just this is out as a temperature now I just touch that on there you can see straight away that it melts into it he really just vaporizes to start I will do too much of that now what we're doing is we come to the area you in on this path so we're the crowd is their first thing to do is get it lined up.