As the specifications of bulk Ethernet cables continue to evolve, the process of installing them becomes increasingly complex. Therefore, whether you're installing Cat6 Ethernet Cable, Cat6a Ethernet Cable, or Cat5e Ethernet Cable, there are a few DOs and DON'TS to keep in mind. If you're unfamiliar with these points, hang in there with us; we've got you covered.
Before we continue, let us state that a properly installed ethernet cord significantly reduces downtime and allows for the uninterrupted flow of data. Additionally, connectivity between your computers, laptops, modems, routers, adapters, or any other device remains intact and constant (free from unnecessary interruptions).
Recognize Locations/Places
At the outset, you'll identify a location for the bulk termination of your ethernet cables. Then, after you've resolved it, you'll move on to the phase of meticulously planning your entire ethernet network installation.
Spacious
In terms of installation location, it should be sufficient to meet current needs and future needs if you plan to upgrade or expand your network.
Cable Types and Environmental Conditions
Suppose you are installing ethernet cables in bulk in locations exposed to harsh environments. In that case, you must choose ethernet cables with industrial-strength properties such as UV resistance, oil resistance, and the ability to withstand extreme temperatures.
Additionally, ensure that you purchase braided or foil-shielded ethernet cables to protect against EMI, crosstalk, and interruptions (clearly, the signal quality will not be compromised, and signal strength will be more substantial).
Choosing The Correct Cable
Ethernet cables are available in a variety of configurations. Which one is best for you is determined by your requirements, such as data transfer speed, bandwidth capacities, price range, and the appropriate variant (discussed in the following paragraphs).
Let's begin by taking a quick look at the features of the most popular cables.
Additionally, the Cat6 Ethernet cable is backward compatible with all of its predecessors. These cables can transmit data at speeds of up to 10Gbps (though there are some length/distance restrictions). In addition, these wires offer a bandwidth of up to 550MHz, superior protection against crosstalk and EMI, and longer service life.
Cat6a Ethernet Cable: These cables upgrade to Cat6 cables, offering an increased bandwidth capacity of 750MHz and a data transfer rate of 10Gbps over a distance of 100 meters. These cables are available in either pure copper or copper-clad aluminum; however, the former is the preferable material. These cables comply with all applicable regulations and are RoHS compliant.
Cat5e Ethernet Cable: This Ethernet cable is still a reasonably priced option that is extremely popular among home users. Cat5e Ethernet cable has a maximum bandwidth of 350MHz and a maximum data transfer rate of 1Gbps (sufficient for the majority of the home users).
Plenum, Riser, and Outdoor Installation Spaces
This factor also has a significant impact on the entire ethernet wires installation process. You are only permitted to use plenum-rated cables in plenum spaces. These cables offer resistance to fire progression because their thick, high-quality jacket material acts as a fire retardant. Plenum cables are frequently used in place of riser cables due to their superior safety features.
If you're installing ethernet cables in the building's riser spaces, you'll want to use riser-rated cables. Although the jacket material of these cables complies with some stringent safety requirements, it falls short of that of plenum cables. In riser spaces, you can also use plenum-rated cables, but the former is more expensive. As a result, it is preferable to use riser-rated cables in riser spaces.
The Installing Procedure
Cross-power your ethernet cables at a 90-degree angle to avoid interference.
Color Scheme: Using different color schemes will benefit you because your data lines will remain organized.
Labeling is also helpful, so always label your cables. The labeling assists you in determining the following: the location for which the cable is intended, the method by which the cable was terminated, and whether the cable is for jack or ethernet.
System of Wire Management: It is critical to use an effective and safe wire bundling device to organize patch cabling between racks. Additionally, it is preferable to space ethernet cords within a patch panel and dress your cabling without crossing or diving. Additionally, the mapping is beneficial during replacement or repair processes.
Avoid Running Cables in Unsafe Areas: It is preferable to avoid running cables in unsafe areas. For example, when installing an ethernet cable, ensure that it does not contact ceiling tiles or passes through an electrical conduit or water pipes.
Attempt to Avoid Bundling Tightly: Bundling your ethernet cables too tightly has a detrimental effect on their performance while also lowering the signal quality.
Rack management: Excessive heat will result from cramming too many cables into a single rack. It is a bad sign because your frames must remain calm. Additionally, it is preferable not to expose your ethernet cords to terminations. It will cause internal damage to the wires.
Always purchase pre-configured Ethernet cables: It is always preferable to buy pre-configured Ethernet cables.
To order high-quality ethernet cables, contact us IMMEDIATELY! We are the largest manufacturer of pure copper ethernet cables globally, and we offer free shipping throughout the United States on orders over $99.
