Latest dealsDeals See all deals→
Stretchwrap Explained: Choosing the Right Film for Secure Pallet Loads

Stretchwrap Explained: Choosing the Right Film for Secure Pallet Loads

The Pallet Wrap Store
The Pallet Wrap Store
3 min read

Two pallets can carry the same goods and ship on the same truck, yet only one arrives intact. The difference comes down to the pallet wrapping film and how it was applied. Film that is too thin tears on box corners. Film wrapped too loosely lets loads slide. Both mistakes are easy to spot once you know what to look for. This blog covers the choices that matter: film format, gauge, wrapping sequence and the limits of stretch film.

Each section tells you what to choose and when to act. Begin with the biggest decision: hand film or machine film.

Match the Film Type to Your Wrapping Method

Use hand film if you wrap up to 15 or 20 pallets a day, and move to machine film once volume rises past that. Hand film suits small teams and mixed loads. Machine film runs on a wrapper, which keeps tension even from the first pallet to the hundredth. Both count as pallet stretch wrap, but they behave differently once the load is moving. Here is how the options compare in practice:

 

  • Hand film: Inexpensive to start, works well for irregular shapes, but outcome depends on the individual doing the work.
  • Machine film: Provides faster and more reliable wrapping, but requires a turntable or wrapper.
  • Pre-stretched film: Lighter rolls that don't strain the wrists and require less film per pallet.

 

Pick a Gauge Based on the Load

Choose thicker film for heavy or sharp-cornered loads, and thinner film for light, stable cartons.

Gauge is measured in microns, and hand rolls usually run between 17 and 23. Thickness alone does not decide strength. A 17-micron film stretched properly often holds better than a 23-micron film wrapped loose. Use these starting points when you order:

 

  • Light boxed goods: 17 to 20 micron hand film.
  • Heavy or sharp-edged loads: 23 micron film or machine film.
  • Outdoor storage: UV-stabilised film.

 

Wrap From the Base Up for a Stable Load

Start at the base, wrap upward with overlap, and finish with the tail pressed flat. Do this at the packing bench, before the pallet moves. Loads shift most at the bottom during forklift handling and transport, so the base layers need the tightest grip. Follow these steps on every pallet:

 

  • Tie the film to a pallet corner or board to anchor it.
  • Wrap the base three or four times to lock the load to the pallet.
  • Spiral upward with roughly 50% overlap on each turn.

 

Secure Your Next Shipment

Many wrapping-related losses are preventable with the right film. Use stretch film for everyday dispatch, step up to heat-applied pallet shrink wrap only when outdoor storage or long transit demands it, and always wrap from the base upward.

Wrapping looks simple, but film choice and technique decide whether a load holds. The Pallet Wrap Store is ready to supply the film your loads need. Head right now, browse the options and order with confidence.

Similar Reads

Browse topics →

More in Work

Browse all in Work →

Discussion (0 comments)

0 comments

No comments yet. Be the first!