Sarking your roof can help you reduce the noise from the wind. It can also help you reflect the sun’s rays and keep moisture out of your home. In addition, you can use vapour barriers to keep the water from leaking into your home.

Insulate your home

Sarking is a type of insulation that protects the home from moisture and dust. It also increases the overall thermal performance of the roof structure. If the sarking is installed correctly, it will help you save money on your energy bill.

Sarking is a strong laminated membrane that acts as an insulation and a vapour barrier. These two factors can prevent moisture from entering the roof cavity and causing mould problems. In addition, it will keep your home warm in winter and cooler in summer.

Sarking is usually made up of a reflective foil layer and a backing sheet. Depending on your needs, you can choose from several different sarking products. However, each will have its own R-value and must meet a specific R-value depending on your climate.

Reduce wind noise

A roof sarking system is a pliable membrane lining under tile or metal roofs. It protects the home from rain, dust and strong winds. Sarking also improves the insulation performance of a home.

A sarking system includes a sarking product, an adhesive backing sheet, and an aluminium foil lining. Typically, the sarking is laid out in a section, usually away from the eaves. The sarking can be installed prior to or during the construction of a new home.

Roof sarking can be used in a variety of applications. It may be installed as a sarking layer under a tiled roof or under an asphalt shingle roof. As a sarking membrane, it is often reflective and provides an extra layer of protection.

In the past, sarking was widely used on wood roofs in Europe. However, it was not popular in North America. With the rise of asphalt shingles in the US, sarking became less necessary. Instead, tar paper was commonly used.

Reflect the sun’s rays

One of the best ways to boost your home’s energy efficiency is to install a reflective roof. The material is a laminated membrane that can be installed underneath a tiled or metal roof. In addition to the aforementioned benefit, it also acts as a second skin and acts as a shield against drafts, draughts, dust and moisture. Using it will improve your occupants’ comfort and reduce your overall energy bills.

The best part is that the product is not only effective at insulating your home, but it’s also a breeze to install. All it takes is a few simple tools and a few hours to complete the job. Fortunately, there are several companies in the market that specialize in the installation of sarking, including Fletcher Insulation, which has more than 25 years of experience in the business.

Prevent moisture from getting in

A roof sarking is a protective layer of insulation that is installed under tiled or metal roofs. It acts as a vapour barrier, which protects the building from moisture, wind and dust. The membrane also helps to reflect radiant heat from the sun.

It is important to install sarking if you have a new or existing roof. If you don’t, you may not catch leaks or prevent moisture from entering your home.

Sarking is a layer of insulation that sits between the roof and the roof cavity. When installed correctly, it protects the roof from moisture and drafts.

Sarking is used on tiled, metal or colorbond roofs. It can be added to an existing roof or installed before installing new tiles. In addition to its thermal and moisture protection, sarking can help to improve the overall insulation of the roof.

Form a vapour barrier

Having a vapour barrier on your roof sarking is an important step to ensuring the health of your home. If you don’t have one, your roof might suffer from mould, condensation and moss. The same applies to your walls, floors and ceilings.

The most effective vapor barrier is a thin, water-permeable film. These are commonly found in cladding and thermal insulation systems in buildings. They are usually polyethylene sheeting. Depending on your location and climate, you might have a choice between a wet-adaptive or wet-resistant type.

For instance, a typical permeable class 3 insulation has a vapour permeance of more than 1.14ug/N. Paper faced plasterboard has a permeance of 2.0ug/N.

The same type of insulation material is also used in a vapor barrier film. Although this material may have a higher permeance, its main function is to prevent vapor diffusion into the structure.