Disclaimer: This is a user generated content submitted by a member of the WriteUpCafe Community. The views and writings here reflect that of the author and not of WriteUpCafe. If you have any complaints regarding this post kindly report it to us.

The canon e05 is triggered by a problem with the ink cartridge that has been inserted in the Canon printer's cartridge slot. When using a Canon printer, an ink cartridge permits ink to travel through a small opening to print on papers, banners, and other materials.

Consequently, if you don't use your printer for an extended period, the ink may dry out and clog the cartridge hole. It is also possible that the canon e05 is caused by a problem with the cartridge holder or that it occurs when replacing the cartridge. This is a common blunder that may be easily avoided by following the steps above.

Solution 1: Disconnect the Canon printer from the computer.

Generally speaking, the most typical solution for this canon e05 is to turn the Canon printer off. You may get canon e05 as a result of overheating on your computer.

  1. The Canon printer can be restarted by pressing and holding the Stop button for 5 to 6 seconds.
  2. As soon as your Canon printer has been turned on, it is immediately ready for use.

If the problem continues to occur, move on to the next step in the process.

Solution 2: Restore the factory settings of your Canon printer to their original state.

To troubleshoot canon e05 on your Canon printer, you can conduct a factory reset on the device. Although the factory setting can be used to restore settings to their original condition, it will also remove all of the settings and specs associated with your Canon printer. A factory restart, on the other hand, is the most efficient and straightforward method of resolving any difficulties and error messages:

  1. Start your printer to gain access to the factory reset option.
  2. Now, select the choice from the menu bar.
  3. To browse through the Setup menu, use the directional arrows.
  4. Select Device settings from the drop-down menu and press OK.
  5. To begin the factory reset procedure, select the resetting option and press the OK button.

If the canon e05 printer issues persist after you have performed this method, repeat the process. If the problem persists, move on to the next possible remedy.

Solution 3: Take a look at the cartridge's location.

When the E05 Canon Printer Error occurs, it could be caused by a misaligned cartridge. Sometimes, we remove the cartridge and force it back into the improper position, which might cause damage to the cartridge and cause it to fail. Because of this, you will be able to remove and reinstall the cartridge. Check to see that the ink cartridge is correctly installed and that the printing is accurate.

Solution 4: Unblocking and reinstalling the ink cartridge is the fourth solution.

There are several possible causes of canon e05, including dust particles and dried ink. It is necessary to reinsert the cartridge as well as to clear the obstruction. Take the actions outlined below:

  1. To begin, remove the lid from the Canon printer.
  2. By hitting the power button, you can turn off the printer.
  3. The installation of an ink cartridge will be noticeable to you.
  4. Afterward, remove the ink cartridge by pressing twice on the lock on the side of the cartridge holder.
  5. To clean the “golden metallic strip” on the front of the cartridges, use a soft, clean cloth to wipe it down from top to bottom.
  6. Ink cartridges should be replaced regularly.
  7. Restart the Canon printer if necessary.

The cartridge facilitates the ability of the Canon printer to read any instructions. As a result, make certain that the ink cartridge is free of debris. The following Canon error code E05 solution may be of assistance if the error continues.

Solution 5: incorrect and broken ink cartridge has been installed

Additionally, ink cartridges that have been broken or incorrectly inserted can result in the canon e05. If this occurs, you must acquire the correct ink cartridge and install it properly as specified on the side of the cartridge packing.


Your Error core E05 questions should have been satisfactorily addressed by the content of this page. Simply follow each step in the procedure to resolve the E05 Canon Printer Error, and you will be able to use your Canon printer without any further complications.




Welcome to WriteUpCafe Community

Join our community to engage with fellow bloggers and increase the visibility of your blog.
Join WriteUpCafe