A Wavlink AC1200 wireless range extender makes it simple to expand the reach of your current wireless network wherever you are. Your present network is strengthened and enhanced by the placement of four antennas in an unique, patented omnidirectional arrangement. The Wavlink AC1200 dual-band wireless range extender will gradually increase the capacity of your wireless network. Your wireless network's capacity will gradually be increased by the Wavlink AC1200 dual-band wireless range extender. It offers a very practical and compact design that makes deployment simple. Additionally, its beautiful form will perfectly match the interior design of your home or place of work. This post will guide you via Wavlink AC1200 wifi extender setup.
The high-performance antennas let you connect all of your devices from wherever in your house. Additionally, the Wavlink setup creates a wireless link with your router. As a result, it starts automatically boosting the signals from your router.
Wavlink AC1200 wifi extender installation
See the information below for a step-by-step instruction on installing the Wavlink AC1200 using WPS:
- The Wavlink AC1200 must be connected to a power source.
- Watch for the extender's solid blue light to turn on, showing that it is powered on and off.
- At this point, press the WPS button on the extender.
- Next, turn the wireless router or modem WPS button on.
- Do not unplug the AC1200 while the extender's LED is flashing.
- The WPS-based Wavlink AC1200 setup is now finished.
- The WiFi repeater's power, client, device, and WPS lights will all become solid green as a result.
- Where the current weak signals are, install the Wavlink extender. also get reliable WiFi connectivity.
Note: Contact our technician or go to the official website, ap extender setup, if you need assistance with your Wavlink AC1200 extender.
How do I configure the Wavlink AC1200 WiFi Extender via manual method?
These steps must be followed in order to connect the Wavlink AC1200 extender using a web browser:
- Your AC1200 Range Extender must be connected to an electrical outlet.
- You must now switch your extender to repeater mode.
- Go to your tablet's or laptop's WiFi settings.
- Likewise, look for and join the Wavlink-N network.
- After connecting to the extender network, launch any web browser, such as Microsoft Edge, Mozilla Firefox, or Google Chrome.
- Additionally, type wifi.wavlink.com or 192.168.10.1 into the address bar.
- Currently on the Wavlink AC1200 setup page.
- To connect your extender to your home network, follow the steps displayed on the screen.
Troubleshooting Steps for the Wavlink wifi extender
- Some gates with the IP 192.168.10.1 have a default setting that disables the WPS button. You can set up your extender by heading to the Wavlink wifi extender setup management page if the WPS button does not enable you to connect.
- Ensure that the extender is situated near your wireless router.
- If not, your enhanced network's performance will vary significantly. Make sure it is a minimum of one metre away from your router.
- Make sure there are no electrical interference devices near the location of your connection.
- The usage of Bluetooth-enabled appliances, such as cordless phones, microwaves, and baby monitors, is not recommended.
How do I reset my Wavlink WiFi Range Extender?
- Before resetting the Wavlink AC1200, connect the extender to an electrical outlet.
- Light the lead when the extender is powered up.
- Look for a paperclip or a toothpick.
- Additionally, before releasing the pinhole, hold down the reset button for ten to fifteen seconds.
- As soon as the power led light transitions from amber to solid green, wait till it does so.
- It has now been successful to factory reset the extender.
- The Wavlink AC1200 setup instructions must be followed to uninstall and reinstall the WiFi extender.
0
