Whether you're looking to connect a pipe or you're a mechanic, you need to know what DIN flanges are. The following article will give you a quick overview of their uses and what they can do for you. If you're still unsure, consider reading on to learn more. Listed below are some of the most common uses for DIN flanges. If you don't see your application listed, contact a technical department.
What are DIN Flanges
The term “DIN” stands for the German Institute for Standardization and is a non-profit organization that develops standards for several industries and society at large. The standards of the DIN are widely used in Europe and include general and detailed specifications for products, processes, and services. PN (Pressure Nominal) is also commonly associated with DIN. In other countries, this designation refers to the Pressure Nominal equivalent of a flange.
The German Institute of Standardization (DIN) sets the standards for flanges. The European system has its own set of standards for flanges, while the American system uses the metric system. ANSI and DIN flanges are both available in the same flange styles, but the difference lies in the measurements. For example, the PN16 is suitable for pressure ratings of 16 bar at ambient temperatures.
While the standard is international, the dimensions of the various flange types vary. ANSI flanges are measured in inches (the conventional unit), while DIN flanges are measured in millimeters (mm) and pressure units (bar). The metric units are often used in construction, as the metric measurements are more accurate and stable. They differ in size, length, and pressure rating, and they must be ordered according to the required tolerances.
Uses of DIN Flanges
The German Registered Association, known as the Deutsches Institut fur Normung (DIN), develops standards and regulations for all sorts of different products, including flanges. These standards apply to nearly every technology sector, and the most common countries to specify DIN Flanges are Germany, the United Kingdom, Canada, and the U.S. However, there are a variety of uses for DIN Flanges.
For example, DIN 2532 flanges are often used for pipe connections that are between 1/2 inch and 24 inches in diameter. The nominal sizes of DIN 2532 flanges range from PN6 to PN64, depending on their application. The different sizes, and pressure capacities, are described in more detail by a supplier. To get the most out of your flange purchase, make sure you know what kind of application it's for.
If you're not sure what kind of DIN Flange you need, you can search online for a manufacturer that specializes in these.
Their wide variety of DIN flanges includes a variety of standard and custom thicknesses. Choose between a blind, slip-on, or threaded neck DIN flange.
Visit: DIN Flanges Manufacturers
