Wastewater treatment plants can be installed on the manufacturing site of a factory or a production house. Its main purpose is to treat water from industrial process and eliminate the pollution present before reusing it in the form of recycling or discharging it into the usual environment. Any wastewater treatment plant must take stock of the law and obey the legislation (prefectural decrees, ecological and health regulations, etc.) which are appropriate to it in terms of discharge, water quality, standards.
Which treatment system best suits industries need?
The typical water purification procedure: in a conventional wastewater treatment plant, the operation is based on no of stages (pre-treatment, primary treatment and secondary treatment). The pre-treatment phase permits water filtration to be carried out and can consist of screening, grit taking away sedimentation and degreasing. This phase filters the major waste but does not constitute a complete action. The primary action is the equal of settling (filtration, membranes). The objective of this step is to take away as much organic matter as possible. Secondary action ensures ultimate work against organic bacteria contained in wastewater.
The biological treatment system for larger production or treatment of chemical effluents
Biological treatment is a answer to a one-time or long-term augment inflow and to the action of chemical-type effluents. Biological treatment responds so rapidly to your problem and integrates with your obtainable facilities.
Any water leaving a treatment plant in Europe and being free into the natural surroundings must have a pH below 8.5. However, depending on the industrial sector, it may be hard to meet this threshold. Food industries, for example, often use water to rinse their tank bottoms. We can disinfect this water and reduce its pH simply by injecting CO2 (carbon dioxide). The results of the analyzes are then simple and predictable.
Reason to choose Air Liquide for water treatment?
Increase the treatment capacity of your biological stations, eliminate foaming, odours and refractory pollution, neutralize alkaline effluents using industrial gases and the expertise of Air Liquide experts.
Your privileged partner in water treatment offers you a global offer of gas, equipment and services. You have all the solutions to bring into conformity, regulate and boost the productivity of your industrial wastewater treatment plants and municipal (urban) water stations.
They works in close collaboration with Effluent waste water treatment companies in Saudi Arabia and offers unrivalled skills and experience. Each solution is the result of constant studies to improve the works of sanitation systems and interventions around water and sanitation.
What types of water can be treating?
All composed urban water (runoff from rainwater, organic and inorganic compounds present in sewage) can be treated directly in a wastewater treatment plant.
Industrial water is frequently additionally polluted; whether for use as cooling water, spray residues or station discharge, there is a waste pit. However, industrial water treatment is no less effective if the devoted infrastructure is efficient.
The problem of water treatment in factories
This shortage of water, a source of deficiency and illness in the populations worried, is largely due to insufficient or no pollution control actions. This concerns several million inhabitants of the Earth. In fact, companies and communities have an obligation to treat the effluents resulting from their activities. The result of the treatments is subject to compliance with increasingly drastic European standards.
