How to paint the exterior of your house

Your home's exterior is one of its most distinctive features. The exterior of your home is a reflection of your pride. Click here to find the best house painting Bundaberg service.

Step 1 – Prepare your surface

Although you may be tempted to just paint, professional-looking results require meticulous preparation. A good surface is the key to good painting. Before you start painting, let the stucco dry for at least 28 days. Stucco that hasn't been dried will not adhere to paint and may appear chalky or dusty.

Tip: Spray stucco with a hose to keep it damp. If it is washed every day, it will cure in one to ten days.

Before you paint, inspect the trim and exterior walls for any cracks, peeling or other defects. Use a garden sprayer to apply bleach. Pressure clean the exterior to remove dirt, paint and other debris.

Step 2: Caulk & Patch

Make sure you have some caulk on hand before you start to use your paintbrush. Sealing cracks and joints between exterior materials is crucial. This applies to window frames, door frames, molding, and fascia boards.

If the stucco has chips or pits, replace it with new stucco. Give stucco time to dry. If wood siding or fascia boards are showing signs of rotting, re-seal them. To create a smooth surface, sand the trim and wood doors.

Step 3: Take the time to Prime

To ensure the highest quality paint job, use a quality sealer. High resin content sealer. It seals old paint and creates a smooth surface for the new paint to adhere to. If you are painting walls that have a lot of dust or chalk, use a chalky wall sealer. Paint will not stick to dusty surfaces.

Vinyl and most wood siding can be used with latex primer for new construction. If stucco is still wet, a hot stucco primer can be useful. This will remove the need to wait and allow you to paint the surface immediately after it dries. Stucco should be allowed to dry for at least the recommended amount of time. To find out the time it takes to paint, refer to the label on your primer/sealer.

Step 4: Pick a quality exterior paint

Exterior paints can be made with 100 percent acrylic latex.

Pigments that give color
Binders that keep the pigment on the walls.
Paints can be spread easily with solvents. Most exterior paints today have a water-based foundation.

The solvent evaporates quickly when paint dries quickly. The solvent evaporates leaving only the pigments and binders. These are known as volume solids. High-quality paints have higher volume solids. Paints of higher quality may also contain better binding agents that will keep the pigments in their place for longer. This improves durability. To find out more about the paint brands' volume solids content, please visit their site or contact your distributor to request a Technical Datasheet. Paints that are marked “superpremium” or “premium” have a higher volume of solids than budget brands.

Step 5 – Select colors with curb appeal

There are so many choices that it can be overwhelming to choose the right color. Take some time to look around your neighborhood and find the colors you like. Remember that bright colors fade faster than colors with subtler colors.

Consider the style elements of your home. You should choose a color that matches the brick accents and stones, as well as your roofing material. Try painting small sections of your exterior to see if you are having trouble choosing between the two colors. To determine which color you prefer, take a look at it at different times of the day. Before you choose a color, make sure to consult your local building department or your neighborhood association.

Step 6 – Spray and roll

The best ways to achieve exterior walls is spraying or rolling them are spraying and rolling. Two people are required to use this technique. For quick and easy paint application, one person uses a sprayer. The second person applies the paint with a roller. This ensures a uniform finish on stucco and other textured surfaces. Use a shield or plastic to cover your windows before spraying. If possible, apply a second coat. It's easier to cover muted colors than those with more vibrant colors. You might need another coat to achieve vivid colors. Two coats will always give you better results. This helps make your home look better. You'll get more from your paint job with a second coat.