5 tips to waterproof your house in Australia

The rainy season is upon us, and with it, the potential for troublesome leaks that can cause headaches and structural damage to your roof. But fear not, for you have the power to waterproof your house like a true expert. We're here tips to waterproof your house in Australia.

While many homeowners opt for professional waterproofing, some of you are savvy enough to take matters into your own hands. By doing it yourself, you not only ensure it's done correctly but also save on costs.

Although experts recommend waterproofing during the hot season when high temperatures encourage drying and absorption of the product, there is always time to do so.

5 tips to waterproof your house

Waterproofing your house means protecting it from leaks, humidity, and flooding caused by rain, which can damage the structure. That is why we give you 5 tips to waterproof your house.

Check that there are no puddles.

In this rainy season, the first thing you should do when waterproofing is make sure that there are no waterlogging or cracks in the roof. If you detect any, you must level it.

To do this, you will have to apply a suitable concrete mix in two layers. Then, you will have to wait 8 to 10 days for the waterproofing to take place.

Clean the surface

Before applying waterproofing, you must clean your roof very well using a broom, soap, and water. This is to ensure that there are no cracks or fissures and to eliminate any debris, rust, or fungus that could affect the application. If previous waterproofing is in poor condition or poorly adhered, you must remove it with a spatula or a wire brush.

Saddle the surface

Once you have cleaned the ceiling, apply a coat of acrylic sealant to the entire area without diluting it and let it dry for 2 to 4 hours, depending on the environmental conditions.

Prepare and generously apply the waterproofing.

Before applying it, you must stir the product well with circular movements from the bottom of the container outwards, eliminating settlements and obtaining the best consistency. Once ready, you must apply the first coat directly from the bucket without reducing it generously. When you are done, you must wait 24 hours to apply the second coat.

Choose the best waterproofing services in Melbourne based on their expertise, reputation, reliability, and customer reviews. Ensure that they offer comprehensive solutions to protect your home from leaks and structural damage caused by the rainy season.

Make sure the weather is good.

The waterproofing should not be applied at temperatures lower than ten °C or higher than 40°C or on wet surfaces. Applying waterproofing in unsuitable weather conditions can affect its adhesion and drying process, potentially compromising its effectiveness. In addition, you must make sure that it will not rain since waterproofing does not wholly resist precipitation until after a day.

In addition, you must consider the type of waterproofing you will use. If the climate is warm and there is strong exposure to the sun, it is best to use white waterproofing, which naturally reflects sunlight and transfers less heat.

But if the climate is cold, it is best to apply red  waterproofing, as it absorbs heat, keeping interior spaces warmer and, in extreme cases, generating energy savings by using less heating. With these tips, you can now waterproof like a true expert.