All You Need To Know About Stamped Concrete Process

All You Need To Know About Stamped Concrete Process

Prior to the decision of adding color and pattern to the stamped concrete, it is essential to acquire the proper knowledge of the stamped concrete process. The stamped concrete process involves a variety of activities which comprises release colors, patterns, base colors, washing and cutting, stamping, maintenance, and sealing. 

Patterns Of Stamped Concrete

There are 75 different varieties of stamped concrete patterns, and each of the stamped concrete patterns has its own unique color combinations. Stamped concrete can be classified into five distinct types of basic patterns slate, brick, stone, texture, and wood. 

Base Colour Of Stamped Concrete 

The majority of the stamped concrete has two distinct colors - an accent color and a base color and there are two different ways of making the base color for new concrete - color and integral harder. The outcome of the stamped concrete will create further put emphasis on the color of the stamped concrete. 

The color is then added to the concrete plant and is the commonly accepted way to color, concrete.  

Release The Colour Of Stamped Concrete 

The release agent prevents the stamp from sticking at the time of the stamping process while adding to the accent color, once the stamped concrete has been washed as well as sealed. While you are selecting the release color, be sure that the release color compliments your base color. 

Stamping The Concrete

After the release agent has been applied, your contractor will get started with the stamping process. The stamping tools will be tamped toward the concrete surfaces and a part of the release agent gets embedded toward the textured surface of the concrete. 

Cutting And Washing Of Stamped Concrete

Once the concrete has been poured, your contractor will cut and wash the concrete slab which takes a time period of about 12-24 hours. Even if you may not require the saw cuts, which can make the look different from its natural appearance. Before the pouring of concrete be sure to have a discussion about the location of saw cuts, so that you get prepared for the processes. After you have cleaned the area, the integral color will put an emphasis on the release color. Although, the final colors will appear after the seal is completely cured and sealed. 

Sealing Of Stamped Concrete

It is very essential to have a discussion regarding the sealing options with your contractor. Be aware the sealed plane will be slippery before that area is dried up, as it is encompassed with liquids or water. For exterior applications, the non-slip additive is recommended for use, and for interior applications, the non-slip wax is recommended at the time of sealing. 

Stamped Concrete Maintenance

Inspect the sealed surfaces and cure them for the purpose of protecting them from damage or wear at proper intervals. In order to extend the performance and coating life, the petroleum spills and chemical solvents are to be wiped up as early as you can. 

Key Takeaways

The stamped concrete comes with various color and pattern options at affordable rates and low maintenance. Here I have mentioned the procedures to install the stamped concrete so that you do not face any hardships and can install it with comfort.