As you got the Linksys velop, it is critically necessary to do its setup in the right sequence. So that, you will not face any errors while enjoying it. As the velop setup process is a bit complex, you can get confused if you are a first-time user. So, just check out this post information to perform the entire process hassle-free from scratch.
Attach Velop Together
The Linksys velop comes with some other satellites that you will require to attach together for its setup. Get the velop parent node and other satellites from the packaged box along with the power and ethernet cables. Here, you will also get a manual setup guide of velop, which we will advise you to go through once.
That guide will walk you through the basic information of velop and provide you with its login credentials. Afterward, attach the main node to the existing modem and other nodes to the main node using ethernet wires. Also, plug them into the power sockets by attaching power cables. Directly move to the next process when you are done with these steps.
Set Up Your Linksys Velop
The second step here is to do the Linksys velop setup process in the right manner. There are mainly two approaches available for the same purpose such as the Web setup and App setup method. So, choose any of them and carry out the setup process using the screen directions.
But, both approaches involve accessing the setup portal on the web browser and Linksys WiFi app. For the first process, connect any device to the velop's network through its wireless network or using an ethernet cable. Then, search for the default web or IP address in that device’s web browser.
Thereafter, login to velop, with its default login credentials, and the Linksys velop setup portal will appear on the screen. Lastly, follow the screen instructions and choose the network which is to be configured. Alternatively, you can use the Linksys WiFi app to carry out the same process.
Note: After making your velop ready for usage, try changing the locations for the parent and child nodes as well. Place the velop router centrally of your house and relocate the satellites to that area where you face slow internet.
Improve Velop Performance
Now, the Linksys velop will start amplifying the existing WiFi signals efficiently. But, to get its better performance, there will be a need to do the Linksys velop firmware update process. Doing so will also allow velop to avoid technical errors or bugs in the network.
- For this process, visit the web management page of your Linksys velop.
- See the latest firmware version under the Administration option.
- Download and save the file if there is any available for your velop model.
- Execute the Linksys velop firmware update process from the same page.
- Ensure to choose the firmware file which is official and not corrupted.
- Finally, reboot the velop and check the improvement in its working.
Resolve Errors From Velop Node
There could be a case when you start getting slow or malfunctioning of the velop node. The other cases can be connectivity issues, connected but no internet, and so on. But, by using some common resolving tips, you can easily fix the errors. Such as relocating the Velop node and satellites to different locations, making the connections again, and many more.
However, if you face a Linksys velop node blinking red issue, there will be an error occurring after you update the firmware. The automatic WAN port detection feature is disabled most of the time when you update the firmware. This is why the ethernet port becomes a fixed WAN port to which the modem is attached. Whereas the other ports become fixed LAN ports and those ports need to be changed. So, try changing the ports for connectivity after unplugging and plugging them appropriately.
Reboot The Velop Node
If still, the Linksys velop node blinking red light error persists, try to turn off and on the entire setup. Take out all the nodes from the power outlets and plug them in again after waiting for some time. This simple technique might help you to remove the blinking light issue from the velop node.
Finally, confirm that your Linksys velop is running without any errors, once you use these setup and troubleshooting tips., But, you can directly get in touch with our experts if you get confused during any process. They will assist you with more resolving points for your Linksys velop issues.
