TP Link Deco systems help create a reliable mesh WiFi network across your home. However, network problems can sometimes affect your Deco system. If your Deco device is not working properly or you have forgotten your settings then a factory reset may help.
This guide explains how to reset TP Link Deco safely. It also covers Deco login and solutions for situations where TP Link Deco keeps disconnecting.
When Should You Reset TP Link Deco?
A reset can be useful in several situations:
- Deco is not connecting to the internet
- You cannot access your Deco settings
- You forgot your WiFi configuration
- The Deco app cannot detect the device
- You want to configure the Deco system again
- You are moving the Deco to another network
- TP Link Deco keeps disconnecting after troubleshooting
Remember that a factory reset removes your existing configuration. You will need to set up the Deco system again after the reset.
How to Reset TP Link Deco Using the Reset Button
The physical reset method is useful when you cannot access the Deco app.
Step 1: Find the Reset Button
Locate the reset button on your TP Link Deco unit. The button location can vary depending on the Deco model.
Step 2: Keep the Deco Powered On
Connect the Deco to power and wait until it starts normally.
Step 3: Press the Reset Button
Use a suitable pointed object to press and hold the reset button. Keep holding it for several seconds.
Step 4: Wait for the LED
Release the button when the LED changes according to your Deco model. The device will restart and return to its factory settings.
Step 5: Wait for Restart
Allow the Deco to complete the reset process. Do not disconnect the power during this process.
How to Reset TP Link Deco Through the Deco App
You can also reset the device through the Deco app when your Deco system is accessible.
- Open the Deco app on your phone.
- Sign in with your TP Link account.
- Select your Deco network.
- Open the device or system settings.
- Look for the reset or remove option.
- Follow the instructions shown in the app.
- Wait for the Deco to restart.
The available menu can vary between Deco models and app versions.
What to Do After Resetting Deco?
After a factory reset, your previous settings will no longer be available. You need to configure the network again.
Follow these basic steps:
- Open the Deco app.
- Sign in to your TP Link account.
- Start a new Deco setup.
- Connect the main Deco to your modem.
- Create a WiFi name.
- Create a WiFi password.
- Add additional Deco units.
- Follow the app instructions to complete setup.
You can then manage your network through the Deco app. Depending on your model, you may also access available settings through Deco login.
TP Link Deco Keeps Disconnecting After Reset
If tp link deco keeps disconnecting even after resetting the system then check your modem connection first. Restart the modem and reconnect the main Deco.
Also check the following:
- Keep the Deco away from large metal objects.
- Place Deco units in suitable locations.
- Check whether your modem has internet access.
- Update the Deco firmware.
- Check cables for damage.
- Avoid placing satellite Deco units too far apart.
- Check the Deco app for network warnings.
If the problem continues then review the network settings through the Deco app.
Important Things to Remember Before Resetting
A factory reset should not be the first solution for every WiFi problem. If your Deco has a temporary connection problem then restarting the device may be enough.
Before resetting your Deco, make sure you know your TP Link account details. Also remember your preferred WiFi name and password so you can configure the network again.
Conclusion
Learning how to reset TP Link Deco can help when your mesh network has configuration problems or becomes difficult to manage. A factory reset removes the existing settings and allows you to start the setup again. After resetting your device, use the Deco app to configure your network and check your connection. If tp link deco keeps disconnecting then inspect the modem connection, placement cables and firmware before performing another reset.
FAQs
1. Does resetting TP Link Deco delete WiFi settings?
Yes. A factory reset removes the existing configuration. You will need to configure the Deco network again.
2. Can I reset Deco without the app?
Yes. Most Deco models have a physical reset button that can be used to restore factory settings.
3. Why does my TP Link Deco keep disconnecting?
Possible causes include poor modem placement, modem problems, cable issues, firmware problems or unstable internet service.
4. Do I need a TP Link account after resetting Deco?
The Deco app generally requires a TP Link account for managing the Deco system. Follow the setup instructions provided by the app.
5. Can I access Deco settings after resetting?
Yes. Complete the Deco setup first. You can then manage available settings through the Deco app or supported Deco login options.
Sign in to leave a comment.