Is your iRobot not connecting to WiFi? Forget the worries! This smart cleaner is the most advanced device with a smart mapping feature. However, sometimes it does not connect to the local network during setup; then, the reasons may be poor signals or using an inaccurate password. Besides this, several other causes are also responsible for the same.
In addition, before you choose any of the solutions to resolve the not connecting issue, you must know about the reasons behind the iRobot Roomba setup issues first. So, to make you aware of such details, we share this brief guide with you. Here, you will find the causes as well as effective troubleshooting tips to eradicate this connectivity problem with your vacuum.
Why does the Roomba wifi setup fail?
Moreover, not a single cause is responsible for the iRobot Not Connecting to WiFi issue. So, we list a few of the primary reasons below:
- Local area network outage (ISP issues)
- Using inaccurate admin details
- Distance from the primary networking device
- The internet subscription is not renewed
- Power outage on the smart vacuum
- Enabled security software on the router
- Interference from the other devices
- Overcrowded wifi
How to resolve the iRobot Not Connecting to WiFi issue?
Further, it is crucial to resolve the connectivity issues of the smart vacuum. You can check for the above-mentioned issues if the iRobot Roomba setup fails or it does not connect after the configuration. After recognizing the errors on the smart vacuum, go ahead with the troubleshooting tips mentioned below:
Troubleshooting Tips
Here are some troubleshooting tips, if your Roomba iRobot Vacuum is not connecting to your Wi-Fi:
Stabilize the internet connection
When your network connection is unstable or the signal strength is poor, then it is necessary to use an Ethernet cable. It is also recommended to wipe off the vacuum sensors.
Approach ISP authority
If there is no internet or weak signal strength, this may be due to a local area network outage or restrictions from your ISP. To resolve these issues, you must contact your ISP and follow its guidelines.
Use accurate admin details
When performing the Roomba wifi setup, cross-verify the admin credentials for the network to which you link your robotic cleaner. Additionally, enter the correct wifi name (SSID) and security key while trying to connect the vacuum to the internet.
Place the iRobot Roomba closer to the router
When you connect the smart vacuum to the home network, it is necessary to position the vacuum on the dock station first and make sure it is closer to the router or within range of the gateway network where the signal strength is better.
Renew the network subscription
Similarly, users sometimes forget to renew their network plans and attempt to connect their smart vacuum to the internet without updating their plans. This results in iRobot not connecting to WiFi, so it is crucial to upgrade your network plan.
Completely charge the robotic vacuum
However, if the vacuum is not charged enough or there is a power outage during the setup process, it can’t join the home network. So, before you link your robotic cleaner, ensure the vacuum is charged completely.
Disable the security extensions on the router
The enabled security software on the router, such as a firewall, antivirus, AD blocker, etc., restricts the network connectivity. Hence, temporarily disable these extensions until you link your vacuum to the router’s network.
Eliminate the signal interferences
Occasionally, signal obstructions around the Roomba cleaner or the router give rise to iRobot Not Connecting to WiFi. Therefore, remove these signal barriers away from the vacuum and the networking device or relocate your smart gadgets.
Minimize the number of connected devices
If there are numerous devices connected to the home network that are not in use, they may overcrowd the internet. Hence, it is advised to disconnect the unused gadgets from your home network and, after that, reconnect your robotic cleaner to the wifi.
What are the methods to hard reset the Roomba vacuum?
If none of the above-discussed methods work to resolve the iRobot Not Connecting to WiFi issue, then a factory reset is the final call. You can hard reset the vacuum using the iRobot Home app or the buttons. Afterward, your smart cleaner reverts to its default settings, and you have to reconfigure it from scratch.
On the whole
All in all, this brief guide sheds light on the detailed information regarding the iRobot Not Connecting to WiFi issue. Here, you find the responsible causes and the easy solutions to resolve this issue. Additionally, procedures to hard reset your vacuum are also discussed. If you still want to know more, then drop us a line in the chat box on our website.
Sign in to leave a comment.