Installing an ij.start.canon Printer on Windows Using a USB Cable

ij.start.cannon

An in-depth discussion of the https /ij.start.cannon method for setting up a Canon printer was presented here. We showed how to establish a wired and wireless connection on Windows and Mac by selecting the proper options during setup.

Before you can start configuring IJ, you need to finish the following. How to Use a Canon Photocopier (A Primer)

You'll need the printer's model number before moving on to the next stage in the setup process.
Always leave enough room on your device for the drivers to install.
Make sure the printer is properly plugged into the wall before proceeding.
Verify your internet connection status.

Canon Wireless Printer Installation for Windows -ij.start.cannon

To get started, connect your computer to the internet and go to https /ij.start.cannon' to get the printer driver for your specific printer model (if available) (if necessary).
When checking that the power switch is properly put into your Canon printer, turn the printer on and press the power button.
Select “Wireless Setup” from the options menu in the driver setup file you downloaded.
Select the wifi option, then go back to the Canon printer's interface and hit the WiFi setup button to finish setting up the printer.
If you are satisfied with the device's new settings, click OK.
Navigate to the Device Settings menu, select LAN Settings, and then select “OK” to apply the modifications.
Go to LAN Settings > Wireless Lan Setup, and after everything seems right, click OK. The printer has started looking for available wireless networks.
Make that the WiFi modem/router is turned on. The WiFi indicator on the printer should now begin blinking.
Then, a menu of connectable systems will appear. After selecting your WiFi network from the drop-down window, confirm your choice by clicking the “OK” button.
We need you to enter your WPA/WEP password (WiFi password). Please enter your password in the fields below and click OK to continue.
In only a few seconds, your printer will link up with the wireless network.
If you have a Windows PC and want to set up Canon's wireless printing software, you must follow the steps outlined above.

If you want to make sure your printer gets set up properly on your Windows PC, you may do so by following these steps:

Go to the ‘control panel' and then the ‘devices and printers option.
It's important to double-check the next screen to see if your printer is recognized. You'll have to do it by hand if you can't find the “Add a printer” option.
You will now see a list of all accessible printers on the screen. Then, from the drop-down menu, select the Canon printer that you want to use.
The computer will then identify your printer after a little delay.
When adding a printer is successful, a checkmark will show in the green section.

You can connect a Windows computer to a Canon printer (available at https /ij.start.cannon – ij.start.canon.com/) over a USB cable and complete the installation process.

Initiate the process by going to the aforementioned link and installing the Canon printer driver.
Connect the printer to the Windows machine via USB.
To access the “Control panel,” type “control panel” into the “Run” box and select it from the resulting list.
From the pull-down menu, choose “Devices and Printers.” A green tick should appear near your printer now.
To add a printer that isn't already on the list, select the “Add a printer” option.
At long last, your printer has been added to the system and is available for use.

To install a Canon printer on a Mac, run the ij start canon command.

Be sure you have the most up-to-date Canon printer driver installed by visiting https://www.canon.com/setup before proceeding.
If you want to use your Canon printer and smartphone over the same wireless network, you should follow the instructions in the first part of this article.
After that, click on ‘System Preferences in the Apple menu's submenu.
To make a choice, select the printer icon (or scanner icon) in the System settings menu.
The “+” symbol at the bottom left of the screen opens a new window.
In the left pane of the window, you'll see your printer's name if it's connected to the network. Simply clicking the appropriate icon will launch the installation procedure.
After this process is finished, your printer will be indicated with a green tick.

Conclusion

We trust that you were able to use this guide to successfully install Canon software on your printer. URL: http://ij.start.cannon/ Following the steps outlined here, you'll be able to use the https /ij.start.cannon setup web-based configuration tool to set up your printer on a Mac or PC.