Sand Blasting Machine in India | Portable Sand Blasting Machine Price

The operation of a portable sand blasting machine is done by hand. The portable abrasive blaster is a safe, high-abundance system delineation device that can be used with a wide variety of abrasive media. Descaling, shot peening, Deburring, Deflashing, polishing, cleaning, and stress relief are some of its functions. The thickness of the sheet used to construct the body of the sand blasting machine should not be less than 6mm. The sand blasting machine is put through its paces in a hydraulic machine with a pressure of 20 kg/cm2. The inner and outer surfaces of portable sand blasting machines are made of mild steel sheet. After embedding the material or abrasive media, a mushroom valve is used for the vacuum pack. The non-return valve (NRV) is used to prevent air from flowing backwards through a filter. Between the pressure gauge and the air filter regulator is the NRV.

The user controls the pressure required for the proper operation of the shot blasting machine, which is at least 7kg. Sand storage capacity of the P7-1000 sand blasting machine is 460 kg.

A filter regulator is used in a portable sand blasting hopper to pass dry and clean air at 80 PSI to the sand blasting hopper. For sand blasting, a pinch valve is used to control the flow of blasting media such as steel shots, sand, abrasive garnet, and so on. The mixing tube is connected to the pinch valve (how much quantity to mix is controlled by the user). The mixing tube has two holes, one for air and the other for abrasive media.

[caption class="snax-figure" align="aligncenter" width="1140"][/caption]

The abrasive hole is connected to the blasting hose, which is already connected to the nozzle holder, which will lead to a 9.5mm sand blasting nozzle. A pinch valve rubber sleeve is used to protect the valve from further damage caused by the blasting process.

The air entering and exiting the sand blasting hopper is controlled by a ball valve. The standard blast hose length is 10 metres, but it can be extended to meet the needs of the user. The diameter of the sandblasting nozzle is 9.5mm.

The portable sand blasting machine in India has a total height of 1611mm. The machine's body is 761mm in diameter. There is one main hole plate in a portable shot blasting machine that is used for maintenance and cleaning the inner part of the portable sand blasting machine P7-1000 because material is embedded for blasting in the upper part of the machine, so there is counterfeit from which blasting media is separated from big particles otherwise big particles will block the nozzle.

15-21 Sq. Mtrs./Hr. is the area covered for surface cleaning. For connecting the components, a 1.25-inch connecting valve is used. The air going inside the machine to create a vacuum and push the mushroom valve upside so that no extra air can get in, and the air going to the mixing tube to generate pressure for blasting are all connected with a tee connector. The tee connector is also 1.25" in diameter. The air that was used to create the vacuum in the machine is released through the release/exhaust valve.

There are two types of portable sand blasting machines. One is controlled by a remote, while the other is not. It's broken down into four sections:

P7-1000

P7-500

P7-300

P7-150

Uses of portable sand blasting machine:

The use and endurance of your metal pipes and possessions made of metals and fittings can be extended with the use of a portable sand blasting machine.

It aids in reviving the material and giving it a fresh appearance.

It enables you to retrieve difficult-to-reach corners and areas.

It aids in the preparation of the surface for subsequent stoning and polishing.

It is more efficient and saves time than sandpaper.

This procedure does not necessitate the use of sophisticated machinery.

Sand blasting is the most effective method for removing trash from even the toughest surfaces, such as concrete.

Application of Portable Sand Blasting machine

Sand blasting machine is utilized in Rail coaches, Axles, Handicrafts, Wooden, Steel pipes, Tanks, Heat Exchangers, Stones, Marble, Granite, Transformers, Military, Ships, Bridges, Dam Gate, Turbines and blades, Vehicle bodies, cars, buses, truck bodies & chassis, Windmill, Casting and forging, etc.

Portable Sand blasting Machine price

The portable sand blasting machine price in India is determined by the type and size of the machine. Airo Shot Blast is India's most straightforward manufacturer of mobile, macro, small, and portable sandblasting equipment. The Sand Blasting Machine Manufacturer has two input lines from which air or sand enters the blending unit; the mixture then flows to an output channel, where it is used to supply an influence stream via a nozzle.

Portable sand blasting equipment is available for sale in India at a low cost and of excellent quality. We are the best sand blasting machine manufacturer, supplier, and exporter in Jodhpur, Rajasthan, India. Our products include shot blasting machines, grit blasting machines, sand blasting cabinets, pressure blasting cabinets, thermal spray guns, arc spray guns, metalizing guns, and abrasive blasting media. Among all the impermanent, the Portable sand blasting machine P7-1000 has the best price. Client satisfaction is our goal, which includes timely dispatch, the best price for the machines, and timely machine maintenance.