What are some of the advantages of mounting your television on the wall?
Tv wall mounted in Melbourne are sleeker, save space, and are safer.
Service for TV mounting by eliminating the need for a specialized TV cabinet, wall hanging your TV frees up valuable floor space. Installing an infrared extender to operate your Blu-ray player, amplifier, or other device allows you to conceal your TV accessories. Residential electrician Melbourne can do this Job.
Safety
When your television is on a stand, it is more likely to be knocked over by children, cats, and charades. Accidental bumps can be avoided by mounting your TV on a wall, protecting your loved ones and your TV.
Reduce Clutter for a Sleek, Minimalist Look
When you hang your TV on the wall, all your cables are routed through the wall cavity. This removes visual clutter, tripping hazards, and unsightly cable messes behind the TV.
What other considerations should you bear in mind?
Fireplaces and brick walls can make mounting a television on the wall more difficult. This is primarily determined by your home and the type of wall you want to mount the tv on. If you're mounting your television on a plaster wall, make sure the bracket is securely fastened. You'll end up with a TV on the floor if you don't find a stud or solid wood in the wall!
If you want to mount your TV on a brick wall, it will be stronger, but running the TV cables through the wall will be much more difficult. Alternative options exist and should be discussed with your installer before beginning the project.
Chimneys in the Neighborhood
Another factor to consider is the presence of nearby chimneys, which could make cable access difficult. TVs placed above a vent may be affected by the heat from the fireplace. Keep in mind that the screen's height can affect the viewing angle when mounting it above a shelf or fireplace.
WiFi interference
Smart TVs mounted on the wall may impact the TV's ability to obtain a consistent WiFi signal. This is because the TV is close to a border, which may cause signal interference, especially if your TV is far from your modem/router.
There are several options for addressing this issue:
1. Hardwire a network cable into the TV (via the wall cavity) to prevent it from responding to WiFi signals.
2. Reposition your modem/router in a more convenient location.
3. Increase WiFi coverage in your home by installing a wireless access point (WAP).
When you wall mount a television, where do all the cables go?
When possible, a good TV installer will route the cords through your wall cavities. This conceals the cables and makes your TV setup appear more streamlined.
While mounting the TV, electricians will usually install a recessed power outlet and cable management plate behind it. All of the TV's power, internet, antenna, and HDMI cables will be routed through the wall at the back of the TV to the location of your A/V equipment. This means that no visible cords are dangling beneath your television!
Sign in to leave a comment.