Some of the most important parts that constitute your printer are ink cartridges. If you have no functional ink cartridge, you will never get clean and quality prints with your printer. Like any component of printers, ink cartridges may develop issues every once in a while. In case you find streaky prints, errors, cartridge recognition problems, seek assistance in the manual. It will make you know how to detect and correct the most common cartridge issues in a short time.

1. Understanding Ink Cartridge Issues

Before you can jump to solutions, need to to know the type of problem you could face:

• The printer does not acknowledge cartridges of ink.
• Low Ink warning with the cartridge full.
• Faded, or stained prints
• Ink cartridges that leak.
• Printer is undoing printing.

The causes of most of these problems are various. Nonetheless, most of them can be corrected at home without having to call a technician.

2. Cartridge Unidentified? Check Installation

Provided that your printer does not recognise the cartridge then make sure that it is properly installed. Remove the cover of your printer. Considerably separate the cartridge and subsequently reassemble it. Be sure to push it in until it clicks. Your cartridge may also not work because of a loosely connected cartridge in the printer.

Examine the contacts in your cartridge. These are the copper or gold dust. Clean them with a gentle action, in case they are dirty or dusty. Apply a lint free cloth or cotton swabs in rubbing alcohol. Make sure that the cartridge is compatible with your printer. Inserting incompatible cartridge can result into the problems of recognition.

3. Low Ink Levels? Confirm Ink Levels

In certain cases printers show low ink messages despite the fact that you have changed the cartridge. This may be due to the fact that this cartridge chip is not compatible with your printer. See what happens when you remove it and replace the cartridge. When the problem still goes on, check out repairing your printer by resetting it to eliminate inaccurate indications.

When you feel that your printer runs out of ink, then it is time that you want the printer cartridge replaced as well. Refill cartridges only when you are good at it. Refills that are bad have the ability to destroy the printer.

4. Fixing damaged or stained prints

Clogged or dry printer heads can cause blotted lines, missing colours, or faded print. This makes the output hard to read. Most printers have clean print head as an option to their settings menu. Repeat such cleaning at least once in a while or twice. In case prints continue looking bad, then you can pull out the cartridge. With mild cloth, wipe the print head. Let it soak in distilled water or isopropyl alcohol.

Use real cartridges. The cheap ink may result in bad printings.

5. Handling Leaking Ink Cartridges

Leakage problems may form mess in your printer, and even destroy your files. In case you notice leakages of ink and you see that the cartridge is not taken off, take it off immediately. Clean the areas affected with an absorbent cloth. Damaged cartridges or faulty installation are the most common causes of the leaks.

One should not shake cartridges filled with ink as it may end up leaking. Care should be taken with cartridges, and they should be kept upstanding.

6. Printer not printing? Reset and reinstall

In some occasions printing in spite of having an active cartridge may not occur because of a warning created by the printer. This may be because of a cartridge-printer connection problem. Resort to turning the printer off, and unplugging it after several minutes. And then reboot the printer and give it a go.

Put on the printer drivers in PC. When the issue continues to occur, be sure to update the firmware of your printer.

7. Tips to avoid Problems with Ink Cartridge Issues

• If you are to go on, and use cartridges, make sure you use compatible cartridges with your printer.
• Never refill cartridges unless you know how to do it.
• Handle cartridges with care so as to avoid damaging them.
• Store unfilled cartridges, dry and cool.
• Use Printer maintenance tools to make sure you have clean printheads.
• Do not long store cartridges. Clogging may be resulted by dry ink.

Conclusion

Cartridge problems are common and most of the time they can be corrected by adequate knowledge. Make installation checks, wipe off the print heads and correct cartridge usage. This will enable you to save yourself a lot of hassle. Changing some parts of your printer regularly increases the life span. It also makes sure that you always obtain the best quality prints.

Applying this guide will provide Step by Step procedures towards solving cartridge problems. It is cheap printer repair Dubai at home, rather than employ the services of experts. For more details, call 045490505.