With Cricut Roll Holder, you can keep the Smart Materials organized and aligned for tidy and accurate cuts. This accessory secures and shows the path to the materials into the cutting machine without the cutting mat. It simply means you must load the material and let the craft plotter do the rest.
Apart from that, this handy accessory has a deep basin that holds Smart Materials rolls upto 4-75 ft (3-2.8m). It also has a built-in trimmer, ensuring a straight edge during the cutting process. Moreover, this Roll Holder can be used while accessing Explore 3 and Maker 3 models.
What are the Benefits of Cricut Roll Holder?
Some of the surprising benefits which make Roll Holder different from others are explained in this paragraph. Have a look at them carefully:
- First, this Cricut tool saves time and effort, as the user doesn’t have to do any cutting work manually.
- Next, Roll Holder Cricut helps prevent mistakes as the material will be placed in its place. It will ensure that each cut has been done precisely and accurately.
- Afterward, it became one of the versatile smart cutting machine tools among users. This accessory can hold different roll sizes, from small to large.
- Then, Roll Holder Cricut can be used, installed, and removed instantly from the compatible machine.
- Other than that, it is a great investment for all craft lovers as it is pocket friendly. In addition, it also helps in taking the custom project to the next level.
How to Install & Use Roll Holder With Cricut?
Before beginning the cutting process, learn how to install & use this crafting accessory. Have a look at the steps written below:
- First, use the marks on top of the Cricut Roll Holder as a guide.
- Now, grooves on the accessory bottom over the material guides on the machine door.
- Finally, use your hands to clamp the door and Roll Holder simultaneously.
- Here you go! Your crafting item is all set to hold on to the Smart Materials.
- After completing the Cricut Roll Holder installation process, gently unwrap any Smart Materials.
- Next, gently feed material through its slot; the mat will guide and up against the rollers.
- Following this, press the Load button and then the Go box whenever you are ready.
- Once the process ends, use the trimmer to trim the material before pressing Unload.
Note: To uninstall this accessory, swiftly lift the Roll Holder off the Cricut guides.
How to Change Cricut Roll Holder Trimmer Blade?
Study the following pointers to learn about the Roll Holder Cricut trimmer blade replacement process. You are guided not to skip any step and be careful when replacing the cutting machine trimmer blade.
- Begin the method by removing the compartment cover from the trimmer upperside.
- Now, dock the blade to the left side of the trimmer’s slot.
- Next, you must pry the trimmer handle to separate it from the blade. It will allow the blade cartridge to drop onto the surface.
- Afterward, hold the trimmer handle in place on the trimmer top and press New Blade Cartridge. It will securely get placed into the handle from the underside.
- Lastly, replace the blade compartment cover and use Roll Holder again.
How to Load Smart Vinyl Into Cricut Roll Holder?
Answer: Complete the Smart Vinyl loading process to the roll holder via the following steps:
- Begin by placing the material roll with the wrong side facing up on the holder’s right side.
- Now, you have to ensure the trimmer is on the left side.
- Next, feed the Vinyl leading edge under the roll holder top part.
- Afterward, push it all the way forward toward the machine. After that, guide it under the material/mat feeders.
- At last, press the Load/Unload button to bring the material completely onto the machine.
How Long Does Cricut Premium Vinyl Roll Last?
Answer: Cricut Permanent Vinyl is ideal for mailboxes, mugs, outdoor signage, and many more. However, they are ideal for weather such as storms and heavy rainfall. Other than that, they are water-resistant and UV-resistant with a strong adhesive that can last up upto 3 years continuously. It’s important to load the Vinyl in a perfect form without any humbleness.
Is It Compulsory to Use a Roll Holder With Cricut Machine?
Answer: Using a roll holder during the cutting process is not compulsory. You can use the chosen Smart Materials by setting the roll on your respective work surface. The Smart Materials rolls compatible with Maker 3 & Explore are Iron-On & Vinyl. No doubt that this Cricut accessory makes it easier to corral. All the DIYers must know how to load & install this item.
