How thrilling that you’ve just brought home a new Cricut Explore machine from the shop. You can now open the box and find a perfect space for it in your crafting area. Before creating your first Cricut project, you must first set it up. But where do you begin? This blog post fills that need. It is a complete manual for getting your new Cricut out of the box and running so you can begin creating projects. Don’t worry if you are a complete newbie. With detailed, step-by-step directions, this blog post will walk you through the whole process of Cricut Explore Setup using two methods. Let us begin:
Essential Things You’ll Need To Get Started
Before you begin configuring your laptop, you must have a few items. They are listed below.
- The Windows and Mac operating systems are compatible with Cricut models. As a result, you also need a power source for your Cricut device in addition to a MacBook or a Windows laptop.
- A wired connection between the laptop and Cricut is only possible if you buy/have a Bluetooth adapter, as the Explore device doesn’t have an in-built Bluetooth adapter.
- For a wired connection, you need a USB cord.
- You can also use a Bluetooth dongle if your laptop is not enabled. If you have all the mentioned items, continue with the next Cricut Explore Setup.
Setup Using a USB Cable
Cricut Explore devices come with a USB cable inside the box. Follow these instructions. It is the first way to connect your Cricut Explore to your Windows or MacBook.
- Turning on your Cricut is the first step.
- Now connect one end of the USB cable to the device and the other to the laptop. (It should match the relevant ports.)
- The device and laptop turn on After the USB cable has been connected on both ends. Then, an installation prompt for USB drivers will show up. If you install the Driver, the Cricut device will connect to your system.
- A request to install a USB driver will only show up if it still needs to be installed on your system. You must manually install the Driver to continue with the Cricut Explore Setup.
- To do this, go to the Device Manager. You must choose your Cricut device from the drop-down menu from the list in the Device Manager window.
- After finding your Cricut machine, move your cursor there and press the Right Button on the mouse. Then a list displays here. Selecting the driver software update option is recommended.
- Next, use Windows Explorer and go to the C drive’s AppData folder. Go to this one’s Roaming folder as well. Choose CricutDesignSpace, Web, Driver, and then CricutDrivers after that.
- Then click OK. Restarting the laptop would make it easier for the drivers to work.
- A USB cable has been used for Cricut Explore Setup to your PC.
Setting Up With Bluetooth
One attractive aspect of Cricut products is their wireless connectivity. Therefore, the user’s comfort depends on their wish and ability to operate the Cricut Explore.
- First, Keep the Cricut device and Windows system within a 10–15-foot range.
- The second step is to ensure Bluetooth is enabled.
- Important to verify whether Bluetooth is enabled by going to the Device Manager. Please use the right button on your mouse when your pointer is on the Start Button. Now a list will appear; choose Device Manager from the list.
- On the Device Manager window, if Bluetooth appears, you have verified that Bluetooth is working on your system.
- The next step is to open the Devices menu from the System’s Settings.
- Then, you must ensure the Bluetooth is turned ON. After turning on the Bluetooth, select “Add Bluetooth or other Devices.” It is usually present at the top.
- a new window will appear, requesting you to select the type of device you want to add. So, select Bluetooth here.
- The system will now start searching for nearby Bluetooth devices. And select your Cricut device when it comes to the search.
- Only sometimes, but sometimes, prompt requests a PIN to pair. Here in the space, give “0000” as a pin.
- Finally, your Cricut Explore Setup via Bluetooth is completed.
Installing Design Space for your Explore Machine
By pairing the System and Cricut machine, you can’t give instructions to the latter for cutting. Here is where Design Space comes in, software used to send projects to the Cricut machine for cutting. Now, we will see the final method in Cricut Explore Setup for your system.
- The initial step is to Open the official Cricut website or put this address into your Chrome browser: https://design.cricut.com.
- After arriving at the Design Space website, choose the Windows download option.
- After the download, you must either enter the Downloads folder or the Downloads tab in the Chrome browser (shortcut: Ctrl + J).
- Subsequently, choose the file by pressing Enter or double-tap from the mouse after locating the setup file.
- Now, the program installation then commences. A Progress bar will appear as the system installs the Cricut app.
- The next Design Space icon will automatically appear on your desktop.
- You should launch the newly installed app from the software’s home screen using your Cricut ID login to the app.
- Suppose it is your first time using the Design Space and Cricut device. Then you need to select the option to Create a Cricut ID.
- After all this, you will enter the app, and it will ask if you want to take a test cut. Now you have completed the Cricut Explore Setup for your system.
Conclusion
To sum up, by helping you with working with the Cricut machine, this article focused on Cricut Explore Setup for a system. It’s because connecting a computer to a Cricut machine takes only a few easy steps and is amazingly simple. Once you have completed the setup process on your system, you can give Cricut the instructions to cut designs of your choice.
Frequently Asked Questions
- Does Cricut Explore require an internet connection?
Sometimes. You may still design and forward the projects to your machine without having an online connection. You only need an internet connection to use some features and functions, such as content synchronization and image uploads.
- Can I use the Cricut Explore to cut Smart Materials?
Although Cricut Explore is not designed or optimized for Smart Materials, you can still cut Smart Materials by placing them on a machine mat.
- What are the Dimensions of this machine?
The Height of this device is 15.01 cm, its Length is 56.31 cm, and its Width: 17.80 cm. The Explore weighs around 4.98 kg, so it is light and portable.
Source URL: – Cricut Explore Setup
