Disclaimer: This is a user generated content submitted by a member of the WriteUpCafe Community. The views and writings here reflect that of the author and not of WriteUpCafe. If you have any complaints regarding this post kindly report it to us.

Having well-working garage door sensors is crucial to keeping your garage door working safely. The US federal law UL 325 requires that all garage doors should have safety features such as safety sensors installed in the garage. Safety sensors are one the most common safety components that a garage owner must need to get installed in the garage. Two garage sensors are located on each side of the garage opening. The garage door sensor is a ‘photoelectric eye’ that works as the safety warden for your garage door openers. When these photoelectric safety sensors start malfunctioning, the garage door won’t close. This issue may appear as the problem of garage door opener repair in Sacramento, but it can also indicate you have malfunctioned safety sensors.

The safety sensors are designed to prevent accidents because of the automatic working of garage doors. The sensor stops the door from closing itself when there is something under it. Whenever it senses something lying in its path, the garage door will automatically stop closing.

So, safety sensors are paramount to reduce the risk of accidents, injuries, damages to your car, and other things under the path of the garage door.

So, if these sensors stop working or have an issue, you need to ensure they work correctly and properly for the safety of you, your car, and other objects lying in its path.

How can you try to fix the garage door opener sensors?

Here are some reasons why you have malfunctioning safety sensors.

  • The lenses of sensors are dirty:

Clean the dirty lenses to see if your garage door still doesn’t close. Since the lenses are so small, they are easier to get dirty. Use a good solution to clean them and wipe the dirt out of them.

  • Poor alignment:

Another common reason why your sensors are malfunctioning is a misalignment of photo eyes.

The photo-eyes should point in the same direction, at the same angle. If sensors are out of alignment, you will find one of the led lights found each sensor to be flashing. Now, take a screwdriver and use it to fasten the screws on the bracket and make sensors lights aligned.

Another way to do this is by bending the bracket back into its initial location.

Once it’s done ensure they are aligned now. To test this, use a cardboard box and keep it before any of the photo-eyes.

Press the remote control to close the door. The door should start to close but will also reopen since the beam between the realigned photo eyes is blocked. If this is the case, your work is done correctly. Otherwise, call a specialist in garage door repair in Sacramento to get the issue solved.

Garage Door Opener Not Work Properly in Colder Climates

Is your garage door not going up in the cold season? It may be due to frozen garage door lining.

The door could also stop working when there is condensation on your safety sensors. So, check your sensors.

If the above solutions don’t help in your case, it’s better to contact a professional of garage doors in Sacramento to get your sensors assessed and fixed. Dealing with garage doors parts on your own can be risky as it involves electricity. Even if you need garage door maintenance service, rely on garage door professionals.

Login

Welcome to WriteUpCafe Community

Join our community to engage with fellow bloggers and increase the visibility of your blog.
Join WriteUpCafe