In today's digital connected world, having a dependable network is very significant for people to perform daily tasks including work, communication and entertainment. Proper setup is very important for the smooth performance of the device and getting better network coverage. Linksys networking devices, whether router or extender, are known for their user-friendly interface. You can easily connect these devices and get a better network connection at your home or office. You have to install and configure the device correctly to achieve the best results. If you are new to networking and desire to perform linksys setup then the structured setup instructions in this article will be very helpful for you. You can check out the step by step instructions and complete the setup without any error and enjoy uninterrupted internet experience. 

Installation Of The Device Hardware 

You can begin the linksys setup process with the installation of device hardware appropriately. If you are installing a router device then you have to attach it with the modem using an ethernet cable. Make sure the modem is turned off while connecting both the devices using the Ethernet cable. Then connect the router device with the power outlet to power it up along with the modem. If you are using a range Extender device then you have to plug it directly into a wall outlet closer to your router device. Turn on the power supply from the outlet and wait for the device to boot up. As your device LED gets stable you can perform the configuration.  

Configuration Of The Device 

Configuring a range extender network or router network is not so difficult. First you have to opt a client device such as a laptop or a computer or a smartphone in which a web browser is installed and then you have to go with the below given steps:

Connect To Linksys Network

First of all you have to connect the client device to the linksys network using ethernet cable or via default SSID & password. Ethernet cable connection is to be preferred for secure connection without any interruption. This connection is very important to get access to the linksys setup page and proceed with the setup.

Launch Web Browser

Moving further in the procedure you have to start the browser such as google chrome, mozilla firefox, safari, microsoft edge or any other to reach the setup page. Use the updated version of the web browser to avoid any difficulty in accessing the setup page. 

Access Setup Page

In the URL bar of the browser you have to specify the web address or IP address to open the Linksys setup page. When the page appears on the screen you have to access the page by using the default login credentials which are admin for username and password for password. Once you reach the setup page the screen will start guiding you to configure your router or extender device.

Configure Settings

If you are configuring the extender device then you have to connect it with the router network using the router network name and password. After connection you have to make the changes in the advanced settings of the device. On the other hand if you are configuring a router device then you have to initiate with the on screen guide and choose the network type. Accordingly the screen will appear and you have to complete the connection and make advance settings of your device.

Finalize Setup

After making all the changes in the device network system you have to submit the changes and let the device apply it. To apply the changes both the devices will restart itself and it will take a few minutes. Once the device starts you have to connect with the new Network and text the network. You have to relocate the range Extender device to boost the coverage and speed.

Conclusion 

Linksys setup is not so difficult whether you are going to configure a range Extender device or a router device knowing the accurate process will help you. Above given instructions on the setup process will definitely guide you with the setup. You can easily add the device to your network system and enjoy high speed internet.