Cleaning bathrooms and toilets seem like the most tedious job to many of us and we all just wanna flunk it. But, the fear of spoiling your marble floors is something that always keeps on bugging you at the back of your mind. Therefore, all of us must know how to clean marble floors in order to get the best out of them without causing any harm to your dream bathroom.
5 Tips and tricks on how to clean marble floors
Use lukewarm water to mop your floor:
Use lukewarm water to clean or mop your bathroom marble floor. It helps in removing the grime and it also reduces the need for any tough solvent that will clean your marble floor easily without disrupting the integrity of your beautiful floor.
Get distilled water:
Distilled water is basically water that has been processed very minutely to get it rid of any minerals and other impurities. After making use of distilled water, you can effectively notice the reduction of discoloration or stains on your marble floor.
Add a little detergent:
Add a mild detergent as in 2-3 drops of dish soap into the bucket with lukewarm, distilled water. Follow the steps of the soap and dilute the solution with a sufficient amount of water. Stir the solution thoroughly until it all gets mixed well. Always add pH neutral soap to your water.
Harsh chemical solutions like bleach, hydrogen peroxide, ammonia, and vinegar can disintegrate your marble floors. Always avoid these products.If you like you can always make use of a readymade marble cleaner. Simply follow the directions on the bottle and then clean as you would with a water and detergent solution. Some products include Stone Tech, Resolve, or Simple Green.Follow the floor with clean water:
After you've wiped the marble floor clean with a detergent solution, you must again mop it with cool clean water. By mopping it again, you’ll be removing all leftover dirt or debris that was still stuck on the floor.
Avoid damaging your marble floor:
Every stain on the marble should be mopped off as soon as possible. This is because marble has a porous character to it and can absorb stains. If you let something sit too long, your marble will discolor or stain. Make use of a wet microfiber cloth and use it to soak up anything you’ve spilled on the marble floor.
Some tips on how to clean tile floors:
If you are doubtful about how to clean tile floors here are some tips that would definitely help you to get your bathroom squeaky clean and shiny. To start with we are gonna discuss some materials that you must keep handy while you’re at it
Bucket or SinkDust MopSoft clothsWet MopMarble Polishing PowderSealerWaterTennis BallMild soap with a neutral pH (pH 7)Stone Soap Formulated for MarbleHydrogen PeroxideHow do you clean marble floors?
Let’s look at some of the best methods about how to clean the marble floors without damaging or reducing their shine to any extent.
A. Regular Cleaning
If you don’t work on your stains as soon as you see them, the stain will be absorbed deeper into the inner layers of the marble. Bright-colored stains may absorb into the porous quality quickly depending on whether your floors are sealed. Here’s how to clean marble floors without any hassle:
1. Clean Up Stains as fast as you can:
The moment you notice spills, they should be cleaned right away. Acidic messes like fruit juices, soft drinks, or vinegar-based condiments can create etching even with a protective sealant. Muddy footsteps must also be removed as soon as possible to avoid destroying the marble because it has embedded grit.
To get rid of solid particles and blot up liquid, take a damp microfiber towel. Smearing the stain will only make things worse. To prevent spots and slippery areas, give the area a quick wash with a clean damp towel and then dry it properly with a microfibre towel.
2. Trap Dust and Dirt
The best-suited tools for trapping dust and loose dirt on a marble floor are a dry dust mop or a mop with use and throw dry sweeper cloths. Do not make use of any dusting spray.
B. Deep Cleaning
You’ll need a stronger stain-clearing element and elbow grease if you still see a stain after it’s set. Food stains, especially coffee, tea, and fruit, can seep into the marble and leave a stubborn stain.
1. Start with a dry mop first:
Start the deep cleaning process with a dry mop to trap loose dust and debris. You will basically have to push the excess dirt around with your damp mop.
2. Mix a Cleaning Solution
Mix lukewarm water and mild, neutral pH soap in a bucket or sink. Follow the instructions written behind on the product label for the correct ratio of water to clean the area properly. Fill a second bucket or sink with clean water to use for rinsing the floor.
You can use a very dilute solution of just a few drops of dishwashing soap per gallon of water, or you can use soaps that are meant for cleaning marble.
3. Mop and Rinse
Wring a soft cotton or microfiber mop after dipping it in the cleaning solution. It is not necessary for the floor to be sopping wet. Work in a small area, rinsing the mop frequently to remove dirt.
Dip the mop in plain water and rinse off the freshly mopped floor to remove any soapy residue left behind as you cover the entire area. This is an important step in keeping the marble from yellowing and becoming dirty.
4. Treat Tough Stains
If the exfoliating solution does not remove all of the stains, try the following methods:
– Scuffs
Making use of a dry tennis ball, gently wipe off the scuff.
– Ink Stains
Make use of rubbing alcohol, saturate a soft cloth or paper towel and cover the stains. Allow the rubbing alcohol to sit on it for a few minutes before blotting the ink away. Wash off the area well with plain water and buff dry until the ink is removed.
– Organic Stains
Use 12% hydrogen peroxide on a soft cloth or paper towel and leave it on the stain for about 10 minutes. If the stain is gone for good, rub off the area thoroughly with plain water and wait for it to dry. Repeat the steps if the stain remains, allowing the hydrogen peroxide to sit for up to 30 minutes.
- Oily Stains
If there are oil stains, to clean the area, blot away as much of the oil as possible initially and then use a mixture of lukewarm water and a few drops of dishwashing liquid. If the stain remains, apply a thick layer of cornstarch over it.
Leave the cornstarch in place for at least four hours to suck the oil out of the marble. Wait until the stain is no longer visible.
– Water Spots
Using plain water, lightly dampen the floor. Using large, circular motions, dry and buff the floor with several soft microfiber cloths.
Dry the FloorsWipe the floor down with a clean, soft cloth or towel as a final step. It can be changed whenever it is required. Working in large circles gives your floor a highly clean and sparkly look.
These are some of the techniques that you can use if you are wondering how to clean marble floors or how to clean tile floors. These are all tried and tested methods and they never fail to remove dirt and stains.
0
Sign in to leave a comment.