Do you have a complicated relationship with Cricut Maker? Where you love to craft amazing crafts but get irritated by facing common issues. The key to all your Cricut Maker Troubleshooting questions is described here. Since its establishment, the company developer’ has launched different models of smart cutting machines.
However, the Maker series gives users the freedom to create anything enveloping paper crafts, iron-ons, and vinyl decals. Apart from that, it contains different tools assisting the user in learning something new while learning a new art. Additionally, the installed blade supports the Cricut in easing the sewing and quilting projects.
If you have any questions and desperately searching for its answers, then get in touch with our article till the very end.
Issue 1: Blade Troubleshooting Questions
Question: How Can I Solve the Issue of Blade Not Getting Detected?
Answer: If you are frequently encountering the glitches of the blade not getting detected by Maker, then clear the error with the following steps:
- First, ensure that the Clamp B tool matches the one recommended in the Design Space Load step.
- Second, you can select the Edit tool to do the common modifications.
- Third, take off the tool from the Clamp and start cleaning off its reflective housing surface.
- Next, click on the Go button flashing on the machine to reinstall the tool inside the respective clamp.
- Now, take off Clamp B, and with soft hands, clean it with compressed air or microfiber air.
- After the clamp will get cleaned, take the respective tool and insert it inside the clamp.
- Try a test cut with a basic shape preferring a system tool like Knife Blade, Rotary Blade, or Scoring Wheel.
- If the test gets successful, it might be due to the original toll drive housing. You must quickly get in touch with the company’s Member Care authorities.
There isn’t a single error you might be encountering while using Maker. The solution to your second issue with the machine is available below.
Question: Why My Maker Isn’t Cutting the Loaded Material Properly?
Answer: In any case, if your die-cutter machine isn’t able to cut the material, this problem can be easily resolved by following the steps:
- Start the process by ensuring that you’ve set the material to match the one set in Design Space and Smart Set Dial.
- From the machine, uninstall the blade housing by opening Clamp B.
- After uninstalling the housing, clean the debris by blowing it or using a thin and smooth cloth. Once the cleaning process then comes to an end, perform a test cut.
- If the error continues, select the Manage Custom Materials from the Design Space application and increase the pressure by 2-4.
- Once you are done doing the above changes, do the test cut. However, you should increase the pressure setting 2-3 times to observe the changes in the cut result.
- Apart from that, you can also attempt to choose a different material, like printer paper, along with the appropriate setting.
- Now, put a new Cricut brand blade back with the currently installed blade.
- Sometimes, the blade needs to change as it gets dull while using it regularly.
- Lastly, if the glitch continues, reapply the 1-8 steps again or get in touch with the Customer Care team ASAP.
Apart from blade glitches, the Maker also gets familiar with the power button glitches. You are expected not to take any tension as we’ve explained the answer to the problem further.
Issue 2: Troubleshooting Maker Power Buttons
Question: What is my Cricut blinking Red After Loading the Mat or Smart Materials?
Answer: If you see that the power button is blinking red while loading the mat or smart material into the machine, then follow the stages below:
- If this issue is happening with one project, the error occurred when the project got corrupted while saving the project. However, you can solve it by re-creating the project on the Design Space.
- The roller bar might’ve gathered debris or dust, leading to this specific error.
- You need to turn off the machine by turning off the power button.
- Now, move the carriage at least 3-4 times to clear off the gathered debris.
- If the issue persists, you must submit your complaint at the company’s Member Care profile.
Other than that, if you are getting power button color issues, then pick up the relevant steps shared below:
Question: Why the Machine Power button Is Red & Other Button are Lit?
Answer: While operating Maker, if one power button is red and the other is lit, then it’s a power-related issue. Cricut often uses power to operate the machine but can’t run the complete machine. In that case, we recommend you try another outlet or power strip. Lastly, for further assistance, do contact Member Care for more inquiries.
In addition to that, you can also encode the accessories troubles by reading the upcoming article’s section.
Issue 3: Maker Accessories Troubleshooting
Question: How can I Remove/Replace My Accessory Adapter from Maker Machine?
Answer: Intending to remove/replace the pre-installed accessory adapter in Clamp A from this craft plotter version, follow the given footsteps:
- Firstly, open Clamp A to remove the accessory.
- Second, while pushing down the clamp, put your thumb under the accessory adapter and apply the appropriate pressure upward.
- Third, the adapter will pop out from the adapter clamp.
- Next, you must place a finger underneath Clamp A to stabilize it while reinstalling the accessory adapter.
- The Maker adapter will snap into place after applying the pressure while inserting the adapter.
On the other hand, if you are facing these kinds of issues while accessing the Design Space for creating crafts, then continue exploring the following information explained here.
Issue 4: Why the Material Uploaded Inside the Design Space Isn’t Changing?
Answer: Sometimes, every user faces the issue where the uploaded material at the Design Space doesn’t get changed. However, you can dissolve this problem by going through the steps written in the subsequent pointers:
- Before commencing the procedure, ensure you’ve paired your Maker with USB Cord.
- Next, you need to disconnect it to turn it off to restart or reboot the system.
- Following the finalization of the system rebooting/restarting, turn on the Cricut and reconnect it with the system.
- If it doesn’t connect, try inserting another USB Cord into the computer’s USB port.
- Then, check for a present Firmware Update for the Maker & try to cut it with a different USB Cord to see if that works.
- However, if the problem continues even by changing the USB Cord, quickly contact Cricut’s Customer Care officials.
In brief, in this article’s section, you’ll be eligible to end material not getting changed on the Design app.
Conclusion
In conclusion, with the article, the Cricut Maker simplifies the fabric cutting process and sewing and quilting projects. You can also structure the respective project on your PC and smartphone using the Design Space app. On the contrary, the troubleshooting issues can quickly get resolved.
Frequently Asked Questions
Question: Where can I find the mobile phone charging port on the Maker machine?
Answer: The Maker will have a standard 5-volt charging port near the bottom on the machine’s right side. With the help of this port, you can quickly charge the smartphone during the cutting process. However, the primary purpose of this machine is to charge the smartphone only.
Question: Where can I find the serial number of my Cricut Machine?
Answer: While unpackaging the box, you’ll find the serial number on the machine’s upper side. The serial number is a 12-character alpha-numeric code that commences with a specific letter depending upon the machine model.
Visit: design.cricut.com/setup
Source: Basic Cricut Maker Troubleshooting [Errors & Their Fixes]
