High Frequency VCXO

High Frequency VCXO for Low Phase Noise, Precision Frequency Control, and RF Signal Stability

High Frequency VCXO: Precision Timing for Advanced Electronic Systems

A high frequency crystal oscillator, or Voltage-Controlled Crystal Oscillator, delivers accurate frequency control through an external tuning voltage. This makes it a valuable timing component for systems that require fine frequency adjustment, stable signal generation, and low phase noise performance. Engineers rely on high frequency vctcxo oscillator products in communication networks, RF and microwave systems, frequency synthesis, phase-locked loops, test instruments, aerospace electronics, and advanced signal processing platforms.

Unlike fixed-frequency crystal oscillators, a 50 mhz VCXO allows the output frequency to be adjusted within a defined pulling range. This controlled tuning capability helps systems correct timing errors, synchronize signals, and maintain stable operation under changing conditions. When combined with high frequency output, low jitter, and compact SMD packaging, a VCXO becomes a dependable solution for demanding modern electronic designs.

High Frequency VCXO products are especially useful where signal purity, timing accuracy, and frequency flexibility matter. With options such as CMOS, LVDS, HCSL, LVPECL, and sine wave outputs, these oscillators can support a wide range of digital, RF, and mixed-signal applications.

What Is a High Frequency VCXO?

A High Frequency VCXO is a crystal-based oscillator that changes its output frequency according to an applied control voltage. This voltage-controlled tuning function allows the oscillator to shift slightly above or below its nominal frequency. The adjustment range is commonly referred to as the frequency pulling range.

Typical pulling range options include:

±25ppm

±50ppm

±100ppm

This tuning flexibility makes VCXOs ideal for applications where a circuit must align with an external clock, recover timing from a data stream, or maintain synchronization inside a phase-locked loop. Because the oscillator uses a crystal resonator, it also provides strong frequency stability and excellent noise performance compared with many other tunable oscillator technologies.

Why Low Phase Noise Matters in High Frequency VCXO Design

Phase noise is one of the most important performance factors in high frequency oscillator selection. In simple terms, phase noise describes unwanted short-term frequency fluctuations around the carrier signal. Lower phase noise produces a cleaner output signal, which improves system accuracy and reduces interference.

A low phase noise VCXO benefits many applications, including:

RF transmitters and receivers

Frequency synthesizers

Clock recovery circuits

Radar and microwave systems

Satellite communication equipment

High-speed networking hardware

Test and measurement instruments

In high frequency systems, even small timing errors can affect modulation quality, signal clarity, and data integrity. A VCXO with low phase noise and low jitter helps reduce these issues and supports reliable high-speed operation.

High Frequency VCXO Product Series

The following High Frequency VCXO types provide compact packaging, fast start-up behavior, low noise performance, and flexible output waveform options. Each series supports applications that require precise timing and stable frequency tuning.

BV0507D SMD VCXO: Compact 7. × 5.mm Low Noise Oscillator

The BV0507D series is a high frequency voltage-controlled oscillator designed in a compact 7. × 5.mm surface mount package. Its small footprint makes it suitable for space-constrained circuit boards used in communication modules, embedded systems, and high-speed digital equipment.

This 3.3V voltage-controlled crystal oscillator offers wide pullability and low phase noise, making it a practical choice for PLL circuits, clock synchronization, and precision frequency control.

BV0507D Key Features

Package Type: SMD

Dimensions: 7. × 5.mm

Supply Voltage: 3.3V

Jitter: 50fs

Frequency Pulling Range: ±25ppm, ±50ppm, ±100ppm

Output Waveforms: CMOS, LVDS, HCSL, LVPECL

Performance Advantages: High frequency output and low phase noise

The BV0507D series works well when designers need high performance in a miniature package. Its multiple output formats also simplify integration into different circuit architectures.

BV0507E High Frequency VCXO: 7. × 5.mm Output Flexibility

The BV0507E series also uses a compact 7. × 5.mm SMD package and supports high frequency, low noise operation. It is designed for applications that require stable clock generation with differential output compatibility, including LVDS and LVPECL systems.

With low jitter performance and flexible pulling range options, the BV0507E supports accurate timing correction and stable signal generation in advanced electronic platforms.

BV0507E Key Features

Package Type: SMD

Dimensions: 7. × 5.mm

Jitter: 50fs

Frequency Pulling Range: ±25ppm, ±50ppm, ±100ppm

Output Waveforms: CMOS, LVDS, HCSL, LVPECL

Main Benefits: High frequency operation, low phase noise, and quick warm-up

The BV0507E is suitable for communication equipment, timing modules, and signal processing boards where stable high frequency output is essential.

BV0914A Ultra-Stable VCXO: 14.65 × 9.35mm for LVDS and LVPECL Outputs

The BV0914A series is a high frequency VCXO available in a larger 14.65 × 9.35mm SMD package. This package size supports ultra-stable performance while maintaining surface mount compatibility for modern PCB assembly.

The oscillator is available with 3.3V or 5V supply voltage options and supports high frequencies up to 122.88MHz. Its LVDS and LVPECL output compatibility makes it a strong choice for communication systems, high-speed data interfaces, and precision timing applications.

BV0914A Key Features

Package Type: SMD

Dimensions: 14.65 × 9.35mm

Supply Voltage Options: 3.3V or 5V

Frequency Availability: Up to 122.88MHz

Jitter: 50fs

Frequency Pulling Range: ±25ppm, ±50ppm, ±100ppm

Output Waveforms: CMOS, LVDS, HCSL, LVPECL

Core Strengths: Ultra-stable output and low phase noise

The BV0914A performs well in systems where high-speed clock signals must remain stable and clean, especially in RF communication and frequency synthesis designs.

BV0914B Low Phase Noise VCXO: CMOS and Sine Wave Output Options

The BV0914B series offers high frequency performance in a 14.65 × 9.35mm surface mount package. It supports frequencies up to 122.88MHz and provides output options suitable for both digital and analog signal environments.

This voltage-controlled oscillator is available with CMOS and sine wave output configurations, making it useful for mixed-signal applications where both logic-level clocks and clean reference signals may be required.

BV0914B Key Features

Package Type: SMD

Dimensions: 14.65 × 9.35mm

Frequency Availability: Up to 122.88MHz

Jitter: 50fs

Frequency Pulling Range: ±25ppm, ±50ppm, ±100ppm

Output Waveforms: CMOS, LVDS, HCSL, LVPECL

Benefits: Wide pulling range, high frequency stability, and low phase noise

The BV0914B is a reliable option for RF systems, timing correction circuits, and high-performance signal chains that require precise voltage-controlled frequency adjustment.

BV122 VCXO: 12.6 × 20.2mm High Stability Frequency Control

The BV122 series provides high frequency voltage-controlled performance in a 12.6 × 20.2mm package. It is suitable for designs that require a stable timing reference, wide frequency pulling capability, and low noise performance.

This oscillator supports high frequencies up to 122.88MHz and offers output configurations such as CMOS and sine wave, along with other standard waveform options. It is designed for applications that demand dependable operation and accurate frequency tuning.

BV122 Key Features

Package Dimensions: 12.6 × 20.2mm

Frequency Availability: Up to 122.88MHz

Jitter: 50fs

Frequency Pulling Range: ±25ppm, ±50ppm, ±100ppm

Output Waveforms: CMOS, LVDS, HCSL, LVPECL

Key Advantages: Low phase noise, wide pullability, and stable high frequency output

The BV122 series serves applications where board space allows a larger oscillator and where stable frequency control remains a top priority.

High Frequency VCXO Applications in RF and Microwave Systems

High Frequency VCXO products play an important role in RF and microwave systems because they provide the precise frequency control needed for accurate signal generation and processing. In RF communication systems, a VCXO often serves as a stable carrier frequency source or as part of a clock recovery and synchronization circuit.

In phase-locked loops, the VCXO adjusts its output frequency to lock onto a reference signal. This function is essential for frequency synthesis, modulation, demodulation, and timing alignment in transmitters and receivers. A low phase noise VCXO improves signal quality by reducing unwanted noise around the carrier frequency.

Microwave systems also depend on clean and stable oscillators. Radar equipment, satellite communication links, and high-frequency instrumentation require accurate frequency references to maintain data integrity and measurement precision. In these applications, low jitter and low phase noise help improve detection accuracy, signal resolution, and overall system reliability.

VCXO for Test and Measurement Equipment

Test and measurement instruments require dependable reference signals for calibration, analysis, and verification. A high frequency VCXO provides a stable clock source for equipment such as signal generators, spectrum analyzers, network analyzers, frequency counters, and RF test platforms.

Because VCXOs can tune their frequency through an external control voltage, they help test systems adjust reference timing with precision. This capability supports accurate measurements and improves repeatability during product validation, laboratory testing, and production line calibration.

Benefits of Choosing a High Frequency VCXO

A high-quality High Frequency VCXO provides several important design advantages:

Precise frequency tuning through external voltage control

Low phase noise for cleaner signal performance

Low jitter performance, including 50fs options

Wide pulling range choices for flexible synchronization

Compact SMD packages for modern PCB layouts

Multiple output waveforms, including CMOS, LVDS, HCSL, and LVPECL

Frequency support up to 122.88MHz in selected models

Strong suitability for PLLs, RF systems, and frequency synthesis

These benefits make High Frequency VCXOs valuable across telecommunications, aerospace, defense, industrial electronics, and advanced computing systems.

Reliable High Frequency VCXO Solutions for Precision Timing

High Frequency VCXO products provide the tuning accuracy, low noise performance, and frequency stability required by advanced electronic systems. From compact 7. × 5.mm SMD oscillators such as the BV0507D and BV0507E to ultra-stable 14.65 × 9.35mm and 12.6 × 20.2mm options such as the BV0914A, BV0914B, and BV122, these oscillators give engineers flexible choices for demanding applications.

With low phase noise, 50fs jitter performance, wide frequency pulling ranges, and multiple output waveform options, High Frequency VCXOs support reliable operation in RF communication, microwave systems, PLL circuits, frequency synthesis, GPS-related timing, and test equipment. For designs that demand accurate voltage-controlled frequency adjustment, a high frequency VCXO offers a dependable and efficient timing solution.

As one of oscillator manufacturers, we will do our best to meet all the needs of customers.