Deck framing Sydney is the method of installing a border board around the outside of your deck. This is a very helpful technique as it can elevate a great deck to a better level. The most dramatic and effective picture frames come with composite decking when a different board colour is used compared to a field deck board. This method is not difficult to do but it requires some planning and forethought.
Added blocking
A picture-framed deck needs to be framed differently than a standard deck. It is always to remember that deck boards can’t run parallel to their supporting framing. You should ensure that the end of the decking is adequately supported by the framing. Read on to learn some of the top benefits of picture framing a deck.
Aesthetics
A picture-framed deck looks better than a deck that has not been picture framed. It is more beautiful and this is a good reason to consider picture framing your deck. Picture framing highlights areas of interest on your deck, such as a fire pit or young trees growing up through the deck. You can also use picture frames to define places that you want to set aside for a specific use such as seating areas, outdoor kitchens and grilling spaces. The mitred corners of a picture-framed deck are attractive, especially on the stairs going up the deck.
Improves safety
Safety is another great reason to consider deck framing. Picture framing your deck improves the safety of your deck. The deck boards call visual attention to their deck edges and stairs, especially for people with visual impairment.
Tips for picture framing a deck
If you want to picture frame your deck to enjoy the above benefits, it is essential to do it properly. Start by installing the support for the decking border. Prepare the picture frame for the border by installing two-by-four material on top of the blocking around the deck for a fastening surface.
Now, run the border around the angled corner and install the picture frame border with your desired overhang. Leave room to install your rail posts. Notch the frame border around the rail posts. Continue the frame along the wall of the house. You may continue the picture frame deck along the house wall.
Securing a picture frame edge
Your composite board should be properly supported on more than 3 joists below. If you need short pieces to complete the project, you will need additional support installed between standard spacing. Reduce the contact area between the support and decking.
Picture framing your deck requires a good amount of attention to detail to ensure the boards are in the same plane as the main boards. During a deck framing Sydney project, it is crucial to know that the picture frame boards cannot be tilted because the outer rim joists aren’t flush with the joists. This is an often overlooked issue that should be remembered. Securing your picture frame boards is very simple. You just have to refer to the installation instructions.
Sign in to leave a comment.