Canon Pixma MG3620 Wireless Setup: A Step-by-Step Guide
Introduction
The Canon Pixma MG3620 is a compact, all-in-one inkjet printer that handles printing, scanning, and copying tasks with impressive efficiency. One of its most valuable features is its built-in wireless connectivity, which eliminates the need for a USB cable and allows you to print from any device in your home or small office. However, getting the WiFi setup right the first time can sometimes be a source of frustration. Whether you're setting up the MG3620 for the first time, moving it to a new location, or reconnecting it after a router change, this guide will walk you through the entire Canon Pixma MG3620 Wireless Setup process in clear, manageable steps.

Before You Begin: What You Need
Before diving into the setup, make sure you have the following items ready:
- Your Canon Pixma MG3620 printer, powered on and with paper loaded
- A wireless router with a working internet connection
- Your WiFi network name (SSID) and password
- A compatible device (Windows PC, Mac, smartphone, or tablet) for the initial configuration
- The Canon Pixma MG3620 driver and software (downloadable from Canon's official website)
- A stable power source for both the printer and your computer
It's also worth noting that the MG3620 supports 2.4 GHz WiFi networks. If your router broadcasts both 2.4 GHz and 5 GHz signals, make sure you're connecting to the 2.4 GHz band, as the MG3620 does not support 5 GHz connections.
Step 1: Download and Install the Canon Software
The most reliable way to set up the MG3620 over WiFi is through Canon's official software. Visit the Canon support website, search for "Pixma MG3620," and navigate to the downloads section. Select your operating system and download the full driver and software package.
Run the installer once the download completes. The setup wizard will launch and guide you through the initial configuration. When prompted to choose a connection type, select "Wireless Connection" or "WiFi Connection." This tells the software to configure the printer for wireless networking rather than a direct USB connection.
Step 2: Connect the Printer to Your WiFi Network
The MG3620 offers two primary methods for establishing a WiFi connection:
Method A: Using the WPS (Wi-Fi Protected Setup) Button
If your router has a WPS button, this is the quickest method. Press and hold the WPS button on your router for about two seconds until its indicator light begins blinking. Then, on the printer, press and hold the WiFi button (marked with a wireless symbol) for approximately three seconds until the power light blinks. The printer and router will negotiate a connection automatically within a few minutes. Once the WiFi indicator light on the printer becomes solid, the connection is established.
Method B: Using the WPA PIN Method
If your router doesn't support WPS, you'll use the WPA PIN method. On the printer, press and hold the WiFi button for about three seconds until the power light blinks. Then, press the WiFi button again briefly. The printer will generate a WPA PIN code and display it on the small LCD screen. On your computer, the Canon setup software will prompt you to enter this PIN. Type the eight-digit code into the designated field and click "Next." The software will relay the PIN to your router, which will then authorize the printer's connection.
Method C: Using the Canon PIXMA Wireless Setup Utility
For more control, you can use the Canon PIXMA Wireless Setup Utility, which is installed alongside the main driver package. Launch the utility, and it will scan for available WiFi networks. Select your network from the list, enter your WiFi password, and click "Connect." The utility will send the credentials to the printer and confirm the connection.
Step 3: Complete the Printer Configuration
Once the printer is connected to your WiFi network, the Canon setup wizard will continue. It will install the necessary drivers, plugins, and utilities on your computer. You'll be prompted to set the printer as your default printer and to configure any additional options such as duplex printing preferences or paper size defaults.
During this stage, the software may also install the Canon IJ Scan Utility, which allows you to scan documents directly from your computer over the wireless network. Follow the prompts to complete this installation.
Step 4: Verify the Connection
After the setup wizard finishes, it's essential to confirm that everything is working correctly. The WiFi indicator light on the MG3620 should be solid (not blinking), indicating a stable connection. On your computer, navigate to the printer settings and run a test print. If the test page prints successfully, your WiFi setup is complete.
You can also check the connection status by pressing the WiFi button on the printer briefly. The LCD screen will display the signal strength and network name, confirming that the printer is properly connected.
Step 5: Connect Additional Devices
One of the greatest advantages of a WiFi-connected printer is the ability to print from multiple devices without additional cables. Once the MG3620 is on your network, you can connect other devices:
- Smartphones and tablets: Download the Canon PRINT Inkjet/SELPHY app (available for iOS and Android). The app will detect the MG3620 on your local network, and you can print photos, documents, and PDFs directly from your phone.
- Additional computers: Install the Canon driver software on each PC or Mac. The software will detect the printer on the network and complete the setup in a few clicks.
- AirPrint (Mac and iOS): If you're in the Apple ecosystem, the MG3620 supports AirPrint. Simply select the printer from the print dialog on any Mac or iOS device connected to the same network.
Troubleshooting Common WiFi Setup Issues
Even with a straightforward process, a few hiccups can occur. Here are solutions to the most common problems:
The printer can't find the WiFi network: Ensure the printer is within range of the router (ideally within 30 feet with minimal obstructions). Restart both the router and the printer, then retry the setup. Also, confirm you're selecting the 2.4 GHz network.
The WiFi light blinks orange or red: This typically indicates a connection failure. Double-check your WiFi password for typos. If you use WPA2-Enterprise security (common in offices), the MG3620 may not support it. Switch your router to WPA2-PSK or WPA3-PSK security.
The printer loses connection intermittently: This can happen if your router assigns a different IP address to the printer after a reboot. To fix this, log into your router's admin panel and assign a static IP address to the MG3620's MAC address.
Software can't detect the printer: Make sure your computer and the printer are on the same WiFi network. Disable your computer's firewall temporarily during setup, then re-enable it afterward. Also, ensure the Canon service (Canon Inkjet Printer/Scanner/FAX Shared Port Driver) is running in the background.
Setup fails after a router change: If you've replaced your router or changed your WiFi password, you'll need to repeat the entire WiFi setup process. The printer does not automatically adapt to new network credentials.
Tips for Maintaining a Stable Connection
To keep your MG3620 running smoothly over WiFi, consider the following:
- Place the printer within a reasonable distance of the router, avoiding thick concrete walls or metal appliances in between.
- Keep the Canon driver software updated by checking Canon's website periodically.
- Avoid changing your WiFi password or network name unless necessary, as it will require reconfiguring the printer.
- If you use a guest network or network isolation feature on your router, ensure the printer is on the same subnet as your other devices.
- Periodically restart the printer if you notice slow print jobs or connectivity drops.
Conclusion
Setting up the Canon Pixma MG3620 over WiFi is a process that, once completed, grants you the freedom to print, scan, and copy from virtually anywhere in your home or office. By following the steps outlined above—downloading the correct software, selecting the appropriate connection method, verifying the link, and connecting your additional devices—you'll have a fully functional wireless printing environment in under fifteen minutes. Should you encounter any issues along the way, the troubleshooting section should help you resolve the most common obstacles quickly. With a stable WiFi connection in place, the MG3620 becomes a seamless part of your daily workflow, delivering crisp prints and reliable scans without the clutter of cables.






Sign in to leave a comment.