The quality of water is a common concern all around. It has often been observed that lack of a reliable water treatment results in poor water quality and health issues. If you want to ensure suitable and effective water treatment for your residential or commercial property, this quick guide to water treatment systems and processes will help.
Although not visible to the naked eye, water consists of many minerals, components, and even contaminants. Regular consumption of contaminated water can lead to serious health issues. Before we focus on different water treatment processes, it is essential to consider the risks of using and/or consuming water that is not clean and fit for consumption.
Health Risks of Consuming Untreated Water
While your water supply is meant to be clean, till the time the water reaches your house, it might become contaminated as it flows through the water distribution system. And its consumption may have an adverse effect on you. Studies show that the common hazardous contaminants are –
1- Nitrate
2- Fluoride
3- Salmonella
4- Arsenic
5- E.Coli
6- Legionella Pneumophila
Fortunately, with proper installation of an effective water treatment system, like Whidbey water filters, you can ensure a clean water supply and eliminate risks.
Water Treatment System Processing
Most water treatment systems rely on the following steps.
Step -1: Coagulation and Flocculation
Contaminated water has a large volume of negatively charged chemicals. It is essential to bring such a negative charge to a neutral state. And to make that happen, positively charged components are added, thereby aiding the formation of large particles.
In addition to that, through flocculation, the already large particles mix and bond with others. As a result, they become bigger suspended particles that are visible, also called flocs. These flocs keep growing in mass and strength till it is time for the next step.
Step -2: Sedimentation
The process of coagulation and flocculation leaves the particles and suspended matter bigger in size and heavy in mass. That allows them to sink and sit at the bottom of the undisturbed water.
Step -3: Filtration
Once all the large and weighted matter has settled down completely, the water treatment system in Whidbey filters the water to get rid of the minute particles and contaminants floating in the water. Effective filtration processes improve the quality of the water significantly.
Step -4: Disinfection
After filtration, the water is oxidized with disinfectants, like chlorine.
It is important to keep in mind that the chlorine used for water treatment is monochloramine. It does not disturb or affect the indoor air quality around the water.
These measures can significantly improve the water treatment quality and prevent any health issues related to consuming contaminated or unclean water.
If you are looking for effective water treatment systems in Oak Harbor, Freeland, and other areas in Whidbey Island, call Whidbey Water Filters at 206-324-5055. They focus and strive to improve the quality of water in Whidbey and other surrounding areas.
