Abrex 500 is a wear safe plate plan structure NSSMC.Vandan Steel & Engg. co. always wears down upgrading its creation system to offer amazing and staggering things. Our consistent search for advancement and quality has provoked us making Abrasion Resistant 500 Steel Plates, which rebuff wear too.
The utilization of scratched spot check ABREX 500 steel plate particularly diminishes the greatness of helper parts displayed to serve granulating conditions. Distinction and dependable steel, ABREX steel plate lessens helper weight and passes on financial points of interest. Assurance of world class scratched spot safe ABREX 500 will delay the association life of contraption and part.
ABREX 500 is through set scratched zone safe steel with a standard hardness of 515 BHN. ABREX 500 PLATES are the most all things considered utilized of the wear safe appraisals. ABREX 500 plate demonstrate a surprising blend of high assurance from impact, convenience, weld cutoff and insurance from scratched spot. ABREX 500 plate has around different occasions the scratched spot security of fundamental steel plate and helps drawing out the association life of mechanical parts.and ABREX 500 from 05mm ~ 50mm thickness.
They are unreasonably firm, with a hardness of 500 HBW they can withstand an impact control from gigantic rocks. Open in varieties like ABREX 500, SUMIHARD 500 and ROCKSTAR 500, our mileage AR 500 Steel plates affirmation creation of magnificent, light – weight yet machines that bear high scratched spot.
ABREX 500 STEEL PLATE SPECIFICATION
Thickness : 5mm to 150mm
Width : 1,500mm to 2,500mm
Length : 6,000mm to 12,000mm
Heat Treatment : N, Q+T
Surface Paint : EP, PE, HDP, SMP, PVDF
Material : ABREX 500 Plate, SUMIHARD k500 Steel Plate, DILLIDUR 500V Steel Plate, Essar Rockstar 500 Abrasion Resistant Steel Plates.
ABREX 500 CHEMICAL COMPOSITION
| PLATE | C | Si | Mn | P | S | Cr | Ni | Mo | B | CEV | CET |
| THICKNESS MM | MAX % | MAX % | MAX % | MAX % | MAX % | MAX % | MAX % | MAX % | MAX % | TYPV | TYPV |
| 4-13 | 0.27 | 0.7 | 1.6 | 0.025 | 0.01 | 1.0 | 0.25 | 0.25 | 0.004 | 0.49 | 0.34 |
| (13) -32 | 0.29 | 0.7 | 1.6 | 0.025 | 0.01 | 1.0 | 0.50 | 0.30 | 0.004 | 0.62 | 0.41 |
| (32) -40 | 0.29 | 0.7 | 1.6 | 0.025 | 0.01 | 1.0 | 1.00 | 0.60 | 0.004 | 0.64 | 0.43 |
| (40) -80 | 0.30 | 0.7 | 1.6 | 0.025 | 0.01 | 1.50 | 1.50 | 0.60 | 0.004 | 0.74 | 0.46 |
ABREX 500 MECHANICAL PROPERTIES
| Thickness | Hardness HBW | Typical yield strength MPa, |
| mm | min – max 1) | not guaranteed |
| 4 – 32 | 470 – 530 | 1250 |
| (32) – 103 | 450 – 540 | 1250 |
APPLICATION
Dump Truck Liners
Cutting Edges
Drag line Bucket Wear Liners
Screen Plates – Chute Liners
Conveyor Buckets
Hoppers
Ore Scrapers
