When you try everything from doubling up the amount of fuel and adding a stabilizer to topping out the tank with metal, you want to save the gas from disposing of. Angler gas tanks usually dry during the off-season and when your boat is on a halt during winters. Following the advice of professionals and veteran operators would be better and that’s why you will find some good tips in this post on how you can remove old fuel from the boat’s tank.
Shut the fuel line
Before starting to drain fuel from the fuel system, it is important to shut the fuel line to the outboard engine and if the fuel is frozen then it is better to first thaw it using natural means such as direct sunlight. After broiling all the remaining fuel out of the carburetor, make sure there is no wet particles remaining around it. If the tank is outdated it’s recommended to look for new Angler gas tanks.
Drain it using a siphon pump
Most of the boats running on the water today have internal combustion engines and outboard motors. They either use diesel fuel or gasoline which is stored in a tank. While removing fuel from the tank, the doer must know that gasoline is a highly flammable liquid and can get hazardous if not handled carefully. They can use a siphon hand pump to draw fuel from the Bertram gas tanks. Keep an additional can and small rag besides to store and clean the removed fuel.
Drive the boat until all fuel burns
Well, this might sound crazy as barely anyone would agree with this if they have gallons of fuel remaining in the store. After all, they would like to save it for reuse after a seasonal break. So why is it mentioned here? Probably because by doing so you can cut back the amount of draining that is needed to be done to an extent. In some cases, it’s not possible; especially when you have a fuel pump breakdown or engine glitches. If you mistakenly pumped diesel in your gas tank, don’t worry, you have this choice of running your boat until the wrong fuel burns out. For new Bertram gas tanks, you can contact professional tank fabricators.
The further process includes containing the old fuel into a separate cane designated for fuel disposal. Now it is up to the boat owner’s budget and requirement whether he needs new Angler gas tanks. If you think your old fuel system is rusted, outdated, and seems risky to carry on, it’s the right to replace it with a new one. For that, you can order customized fuel tanks through Speedytanks and they will fabricate the tank according to your boat’s tank specifications. For more information contact us: https://speedytanks.com/contact-us/
